User Manual

46
Adds new text, image, photo, sound or slide objects.
1.2.2 Sending and saving a message
① When you complete creating the message, press the [OK] key.
[Send Option] menu will pop up with the following options.
n Send: Enters the receiver phone number manually
n Send & Save: Sends out the message like the [Send] key.
Sent message will be automatically saved in the Outbox.
n Save: Saves a written message in the Outbox.
n Save as Template: Saves current message in the Template
② Select an entry on the Send screen.
If the phone number entry is empty, input the receiver’s number.
You can search for the number in the Contacts by pressing the
option Soft key.
③ To send the message to several receivers (up to 9 receivers),
repeat the step 2.
④ When you complete entering the receiver, press the [OK] key.
Note: If size of the MMS exceeds the transmission limit, the information
message will appear. Even though you forget to save the outgoing
message, it will be saved in the Outbox automatically. The ‘Save’ option
will be disabled for the saved message.
1.2.3 Inbox
Select ‘Menu>1.Messages>2. Multimedia Msgs.>2. Inbox’ and press the
[OK] key.
Select Inbox and press the [OK] key to display the received messages
one by one.
Select the [Reply] Soft key at the bottom right corner to choose either 1.
Text Message (Refer to 1.1.1 Write New.) or 2.Multimedia Message
(Refer to 1.2.1 Write New.).
You can receive a MMS notification through the SMS network and read
only the downloaded MMS message.
If ‘Auto Download’ is set to ‘On’, notification will not be made but the
message will be saved in Inbox as unread one.
Check the new message from MMS Inbox.
Select the [Download] to download a message.
Select the [Option] Soft key [ ]at the left of the whole message list to
select the following option.
n Forward: Sends the received message to others.
n Delete: Deletes the selected message.
n Delete All: Deletes all messages in Inbox.
n Reply: Writes and sends a new message using the receiver’s
number.