User Guide

113112
Setting
1
2
To set the graphic mode (Resolution),
- Select the "Resolution" by pressing the [ ][ ]key, or
press the number [ ]key.
- Change the graphic mode with the [left/right] button and press
the [ ]key. (128*128 -> 352*288 -> 640*480 -> 128*128
->...)
- The image storage capacity varies depending on the set mode.
(640*480 > 352*288 > 128*128)
- Pressing the End key or Cancel key does not save the set value
and the existing values are maintained.
- The default set value is "128*128."
To set the Brightness
- Select the "Brightness" by pressing the [ ][ ]key, or
press the number [ ]key.
- Change the "Brightness" by using the [left/right] button, and press
the [ ]key. (Normal -> Day -> Night -> Normal ->...)
- The moving speed of the pictures taken are as follows by the
brightness of each picture:
Normal : 30frame/sec
Day : 30frame/sec
Night : 15frame/sec
- Pressing the End key or Cancel key does not save the set value
and the existing values are maintained.
- The default set value is "Normal."
This menu allows you to manage the taken pictures.
You can make it by pressing numeric [ ]key or
selecting ‘Settings’ on the camera menu.
3
4
5
To set the shutter sound (Sound).
- Select the “Sound” by pressing the [ ][ ]key, or
press the number [ ]key.
- Change the shutter sound by using the [ ][ ]key, and
then press the [ ]key.
- If you would like to take pictures without any shutter sound,
select the “Mute” mode.
- The default set value is “Shutter”.
To set the Self Timer
- Select the Self Timer by using the [ ][ ]key or press
the number [ ]key.
- Change the timer speed with the [ ][ ]key, and
press the [ ]key. (off -> 3 secs -> 5 secs -> 7 secs -> off -> ...)
- The default set value is “Off”.
To set the Sticker.
- Select the Sticker by pressing the [ ][ ]key or press
the number [ ]key.
- Change the Sticker by using the [ ][ ]key, and
press the [ ]key. (Normal -> Frame1 ->... -> Frame10 ->
Normal -> ...)
- The default set value is “Normal”.
- This function is available only in the 128*128 mode. In all other
modes, “Unavailable” is displayed.
g900en07-2 2004.7.6 4:4 PM 페이지112