User Guide

107106
Camera
Snapshot
1
Select Snap Shot or press the [ ]key.
- You can also select "Snap Shot" from the menu by pressing
the [ ]key from the idle screen.
- The lens range is infinity~30cm.
2
If you press the [ ]key or the Camera Display key on the
side of the camera, the screen will be frozen and the picture to
be stored will be displayed.
- Pictures will be taken with the sound set in the Camera Settings.
- The default value is “Shutter.”
- When you see the message “Not enough memory” it indicates
that you have used up the maximum number of pictures that can
be stored, or 100 pictures. Erase unnecessary pictures before
use.
- When the message "Not enough memory" is displayed, it
indicates that you used up all the storage space.
Erase unnecessary pictures before use.
- The message "Existed same name!'" indicates that a picture with
the same name exists. Save the picture in different name.
- Pressing the volume key on the side of the phone enables you to
use the "Zoom" function which will be applied to the pictures to
be taken.
󰥺 󰥺
- Use the [ ][ ]key to apply the following functions
to the pictures to be taken, or use the [ ][ ]key to
change values.
1) Bright : Normal (default), Day, Night
2) Self timer : Off (default), 3 sec, 5 sec, 7 sec.
3) Photo : Single shot (default), multi-shot
4) Effect : Normal(default), Black and White, Sepia, Negative, Emboss
5) Sticker : Normal(default), Frame1 ~ Frame10
6) Size : 128*128(default), 352*288, 640*480
- The Sticker function can be used only for 128*128 resolution.
- With the Photo function, you can take 9 pictures continuously.
You can select "Save" by pressing the "Cancel" or "Save" key.
Save the picture name.
- If you press the "OK" key, the picture title given automatically
will be displayed.
- Press the "Cancel" key to erase the existing name and store the
picture in a new name.
- Press the Menu key to shift between the entry modes for English,
Chinese, numbers and special characters.
- With the phone flip open, the Preview is activated using the
external LCD setup values. You can shift between the external
and internal LCDs by using the Camera key. When the Camera
Preview is ended, the phone returns to the previous setup values
of the external LCD.
- With the phone flip closed, the Preview is activated on the
external LCD regardless of the setup values of external LCD.
3
4
g900en07-2 2004.7.6 4:4 PM 페이지106