User Guide

6968
Press [ ] button to exit menu.
When the answering machine is activated, a “mike” icon appears on the
idle screen.
By selecting this key, one can set the response time before which the
answering machine becomes activated.
One can choose a response time of 3 secs. 5 secs. or 10 secs.
Use the down arrow key to go to the required selection and press the
right or left arrow key to confirm selection.
Press [ ] button to exit menu.
Response Time
This key enables the user to choose between a set of 3 predefined
messages and one user defined message as their choice of response
message, when an incoming call is received.
Absent : “I am not available right now, please leave a message after the tone.”
Meeting : “I am in a meeting right now, please leave a message after the
tone.”
Driving : “I am driving right now, please leave a message after the tone”
User defined message is a message that the user can record by
themselves. The next menu explains this.
Response Message
By selecting this key, one can record messages of their choice to be
played on the answering machine.
Press [ ] button to start recording, by speaking clearly into the
mouth piece/ microphone. Maximum recordable time is 15 secs.
Once a message is recorded, User Defined Message is automatically
selected as the Response Message.
Recording
Select this key to hear the recorded message.
Press [ ] button to hear the recorded message.
In case the user wishes to delete the recording, press [ ] key and
select “delete”.
Message can be re-recorded by selecting the “Recording” key again.
If message is deleted, the answering machine is reset to “absent” mode.
(“I am not available right now, please leave a message after the tone”)
User Message
This key is selected to hear all recorded messages.
To listen to the recorded messages, select the recorded message by
moving the [ ][ ]key and press [ ] button on the
selected message.
To delete the recorded message, press [ ] button and select delete.
A maximum of 10 messages can be recorded in the answering machine.
The answering machine will not work when full capacity is reached (10
messages).
Users can listen to the message being recorded by hearing into the ear-
piece and can connect to the call any time during the recording by
pressing the [ ] button.
Whenever a message is recorded, a “Recorded Message” sign giving the
number of recorded messages is displayed on the sub-LCD. When
flipped open, the main LCD gives the same display. To view the
Recorded message, press [ ] key.
A “Audio-cassette” type icon appears on the idle screen, in case there
any unread/ unheard messages among the recorded messages.
Recorded Message
g900en07-2 2004.7.6 4:4 PM 페이지68