User Guide

Auto power alarm
6766
Reset settings
This feature resets all the values stored
in the handset by the user so that they are changed to the factory-set
default values. To activate this feature, perform the following steps: From
‘Reset settings’, enter the handset password and press the [ ]key
when “Restore factory setting?” appears on a separate screen. This will
change all the values saved in the handset to the default values, while
rebooting the phone automatically.
Information
Own number
This option allows you to input, save, and edit your own phone numbers.
If no phone number has been saved, the ‘List empty’ screen will appear.
If you press the [ ]key at this stage, the Edit screen will appear to
allow you to edit phone numbers. Once the numbers are entered and
saved, they will be stored in your phone.
If you already have a phone numbers stored, press the [ ]key and
select one of the following functions.
1. Edit: Edits saved numbers.
2. Add: Adds new numbers.
3. Delete: Deletes saved numbers.
(Note : You can save up to two Own Numbers.)
Allows you to check the software version of your
handset.
If the alarm has been set through the “auto power alarm on/off”, and the
phone power turned off, the alarm will ring at the time set by the user
while the phone power is turned on automatically. After the alarm, the
phone handset power will be turned off automatically.
On : Auto Power alarm On
Off : Auto Power alarm Off
A unique feature of Pantech mobiles is the Answering Machine function,
by which a user can record up to 10 messages. The user can also
overhear the recording and can choose to accept or reject the call.
You can turn on or off the answering machine by selecting this button.
Use the down arrow key to go to the required selection and press the
right or left arrow key to confirm selection.
󰥺 󰥺
󰥺 󰥺 󰥺
󰥺 󰥺 󰥺
󰥺 󰥺
Answering Machine
󰥺 󰥺
Software version
On/Off
g900en07-2 2004.7.6 4:4 PM 페이지66