User Guide

5150
Last call
Displays the cost of the last call.
Last call
Displays the duration of the last call.
Dailled calls
Displays all the dailled calls
Received calls
Displays all the received calls.
All calls
Displays the duration of all calls.
Reset call time
Resets the duration of the last call or all calls.
All calls
Displays the costs of all calls.
You can clear them via PIN2 authorization.
Clear logs
Clears a log(s) of call cost after you enter PIN2.
Cost units
Allows you to set certain cost as the basis call cost within the service
area. The following two options are available.
- Read units : Reads cost units.
- Set units : Sets the current cost unit and cost per unit.
Max cost
Sets the maximum value of a defined call cost via PIN2 authorization.
The following two sub-options are available.
- Read limit : Allows you to read the maximum limit of a unit.
- Set limit : Sets maximum units.
Allows you to read the information on the duration of calls.
Call timers
󰥺 󰥺 󰥺
g900en07-2 2004.7.6 4:3 PM 페이지50