USER MANUAL
Characteristic Specification Display Dual clamshell TFT LCD both Main & Sub.
Caution Please check and follow simple guidelines below for your safety, and for the proper operation of the phone. Further detailed information is given in the Appendix. ANTENNA Use of the antenna not proved by the phone manufacturer can cause severe damage or malfunction to the mobile. TRAFFIC SAFETY First check and make sure the traffic regulations related to the wireless phone use. Don’t use a hand-held phone while driving a vehicle.
Consult a physician or the manufacturer of the medical device if you have any questions about using the phone in hospital. PUBLIC PLACE Do not switch on the phone in the area where wireless phone use is prohibited. BOARDING AN AIRCRAFT Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft.
guarantee the permitted guidelines, and also cannot assure the safety of all persons, regardless of age and health. PROPER USAGE Use the phone only in its normal operating positions. Don’t touch or bend the antenna unnecessarily while you are calling. It may degrade the call quality and eventually limit the battery’s performance. Do not attempt to open the phone. Non-expert handling may damage it. Use only the supplied or approved batteries, chargers and accessories with this phone model.
Table of contents Caution Components Handset description Internal LCD(Main LCD) Sub-LCD Menu options Function keys Quick start Getting started Basic call functions Menu functions i. Messages ii. Call logs iii. Sound iv. Settings v. Net services vi. Organizer vii. Fun & Tools viii. Bluetooth ix. STK x. Phonebook xi. Hot folder Appendix - How to use T9 & etc.
Components The package items may differ from the ones shown below. The items depend on the service provider’s specification, and the picture below is for user reference only.
Handset Description 8
Internal LCD (Main LCD) There are two areas in both LCD displays (Main and Sub). One is for icons to show the status of the mobile phone. The other is to show message, phone number, icons and etc. Icons are displayed when specific functions are active or when you have received a message. The figure above shows an overview all possible icons and where they appear.
Sub-LCD Menu options Your mobile phone provides extra options for you to select with sub—LCD menu. The following sections describe options in the sub-LCD menu and their functions respectively. There is the ways to access the menu options: [ Normal access ] In standby mode with flip close, press [Vol Down] key for long to enter the list menu screen. Press [Vol Up]/[Vol Down] keys to browse between the functions in the main screen, then press [Camera] key to select and enter.
Flash ON You can turn on the camera flash for emergency light . (1). On standby mode, keep pressing [Vol Up] key to turn on the flash (2). Release the key to turn off the flash.
Function keys There are function keys, which have one and more features. Following table shows list of function keys. Function keys Key Icon Name SEND KEY END KEY OK KEY Key Function Press this key to make a call, or answer incoming call (except ANY KEY ANSWER). Press this key long to redial a last call number. Press this key once to retrieve the list of last dialed. Press this key to end a call, to return to standby state in menu (Cancel, Exit). Long press this key to turn the phone on or off.
Quick start Follow steps below for the first time use; Install the SIM card When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details (PIN, optional services available and so on). If necessary, switch off the phone by holding down [END] key until the powering down message is displayed. 1. Remove the battery 2. Check the SIM slot clear, and place the SIM card into slot 3.
Install the battery Insert tabs on the base of the battery into the notches on the base of the phone, as shown bellows: 1. Insert the bottom of battery into the groove at the bottom of the handset. 2. Press in the top of the battery until you hear a click. Charge the battery Your phone is powered by a rechargeable Li-ion battery. A travel adapter is provided with your phone. Use only approved batteries and chargers. Ask your local PANTECH dealer for further details.
After the PIN is accepted, network searching is started automatically. In this idle mode, dial the phone number with area code. Then press [Send] key to make a call. When you’d like to make an international call, press [0] key long until ‘+’ sign appears (alternately press ‘00’). Then dial national code, area code and telephone numbers those you like. With long press [#] key, you can add ‘P’ pause symbol for around 2 seconds waiting. !! Emergency call is available even without available SIM.
Wrong letter can be erased by pressing [Clear] key. You can erase all characters in a line by long pressing [Clear]. And when continuously pressing, you can erase all character in screen.
Basic call functions 1. Speed Dialing There are two ways for you to do one-touch dialing while in standby mode: You can use the 100 records[00-99] saved in the Phone book by long pressing the desired number. For instance, if the number is saved in the Phone book at the location of 5, long press [5] key to initiate the call. 2.
7. Incoming call waiting (This is the Network and subscription dependent feature. Not available in all areas.) When a call comes in, you can press [MENU] keys to enter the call options. [MENU] 1. Answer 2. Reject 3. I am busy If another call comes in while you are on the phone, you can: Press [End] key to reject the waiting call. Press [Send] key to hold on the active call and connect to the waiting call. 8.
End all calls - Under a circumstance of multi-party call, you can end all calls on one of them by selecting this function.
Menu functions MENU TYPE There are two types of Menu in this phone. One is basic menu, and the other is hot folder menu. To enter the main menu, press one of , 20 , and Keys.
1. Messages You can send new messages, and check received messages 1.SMS/EMS EMS(Enhanced Messaging Service) is sent via SMS (Short Message Service). You can add picture, animation, melody, message and emoticon to a text message, and format the text, using EMS(Enhanced Messaging Service). Before you start You must make sure that the number of your service center is set. Usually, The number is supplied by service provider and is saved on the SIM card. 1.1 Create 1.2 Inbox 1.3 Outbox 1.4 Archive 1.
Settings 1.5.1 Message center 1.5.2 Message lifetime 1.5.3 Message format 1.5.4 Pay for reply? Each function is described as follows in detail. Message center - - Allows the address (URL) of the proxy relay or MMSC to be set. Message lifetime - Controls the lifetime of created messages (1 hour – 6 months) Message format – (normal, fax, voicemail, ermes, nation’l paging, x.400, internet) Pay for reply – Setting for payment 3.
Reading Inbox and Outbox messages 1. Inbox 1. Scroll to “Inbox” and press [OK] key. 2. Press [OK] key from the Inbox messages. 3. Press [Menu] key. 4. Now, You can select “Edit”, “Delete”, “Forward”, ”Text Reply” or “Voice call” as you want. 2. Outbox 1. Scroll to “Outbox” and press [OK] key. 2. Press [OK] key from the Outbox messages. 3. Press [Menu] key. 4. Now, You can select “Edit”, “Delete”, or “Forward” as you want. Creating and sending a message 1. Create Inserting an item in a text message 1.
the phone. (only displayed if Picture or Message is not being selected) Load – load form File view or Media box (File system access) Text style You can change the text format in a text message. 1. While writing your message press [MENU] key. 2. Select “Text style” and press [OK] key. 3. Select format “Underline”, “Bold” or “Strikeout. T9 options You can find how to edit with this options in appendix page, which explains how to use T9 editor. 2. Sending a text message 1.
3. Select “Save” and press [OK] key. 4.You can save the message in file system. Receiving a message When you received a text message, the user will be alerted to the arrival of a message in the convention manner. When the user reads an incoming message the contents are analyzed and displayed on the screen. To read the text message Message is saved in “Inbox” in text message menu. Press [OK] to read the text message. Saving incoming text message Incoming text messages are saved in the SIM card.
2.MMS Creating and Sending a message A new message is created by accessing the “New message”. The user is presented with a screen showing the first page in a blank MMS message. Notice! The screen displays the page with an informational/status bar above the message showing: The presence of any sounds or attachments on the current page. The size of the whole MMS in bytes or kilobytes. The current page number/total number of pages. Creating multimedia message 1.
wish to add and press [ok] key. Then, the icon is shown in the top of the screen. To add a text, Press [MENU] key and select More -> Object properties - > select text files(*.txt) to add and press [OK] key. Then, you can see Object Property menu. Now, let’s control for how long the current page is shown when read. Select “Displayed after” and press [OK] key. And scroll 4 seconds To add a new text press [MENU] key and select Add page then enter text you want to write. In this example, “The end”.
7. Press [MENU] key and select Preview for correction. At the end of correction, press [CANCEL] -> [MENU] key and select Done. 8. In the shown Address option menu, move down to the “To:” line and press [OK] key with the “Add address” line selected. 9. When done entering phone number Press [OK] key. 10. Select “Subject” line with [OK] key and write your subject. 11. And select the Send orSend later line and press [OK] key.
3.Voicemail [MENU] 1. Call 2. On 3. Off 4. Settings With this function, you can call the voice mailbox provided by your network service provider to listen to the voice mail. You can enter this item by selecting Call and the phone dial the designated voice mailbox number for you automatically. Each function is described as follows in detail. Call - The Phone makes a call to pre-defined voice mailbox system to get voicemail.
4.Cell broadcasts [MENU] 1. Read new 2. Read info 3. Settings You can receive cell broadcast offered by your network service. This function is to set and to read info message (Cell Broadcast) provider, and choose preferring topics and languages. Each function is described as follows in detail. Read new Read info - You can receive the message that Newsflashes and District from offered by network service. Settings Language/ Set info subjects You can choose preferring topics and languages where you are in.
2. Call logs With this function, you can set Received calls, Dialed numbers, Missed calls, Clear logs, Call timers and Call costs. 1) Received calls This function displays the phone number of the received call. Phone number of received call can operate received time view, phone number store, delete. 2) Dialed calls This function displays the list of phone number dialed. With menu key, “Call time” and “Add to P-book” features can be displayed.
return to the previous list window by pressing one of OK key, CLR key, and END Key. To store a number in the log into the P-Book, select the number by using scroll up/down key, and press MENU key. Then, POP window shows “add to P-Book” and press OK key. To send SMS to the number in the list, move to the number by using scroll up/down key, and press MENU key. Then scroll to the “SMS” popup menu, and press OK key.
[1] Last call This function displays the cost of the last call with units. [2] All calls This function displays the cost of all calls with units. /****You can also clear logs with PIN2 authorization. ****/ [3] Clear logs This function is to clear all logs of call cost related after you enter PIN1. [4] Cost units You can read defined unit or set the unit of cost in service area. This function has following sub-options to select. -Read units : You can read of Cost unit.
This function display the total kbyte sent and received. (3) Last connection This function display the kbyte sent and received for using GPRS at last time. (4) Clear logs This function is to clear all logs of GPRS related.
3. Sound You can set a sound for ringing, message, key, flip, and etc. 3.1 Ringing settings 3.2 Message alert 3.3 Key tone 3.4 Flip Open tone 3.5 Sound effect 3.1 Ringing Settings Ring Type Ringing tone; ring with one of melody, bell, voice sound, natural sound, or my melody. Vibration; no sound, just vibration. Vib then Ring; ring after vibration. Vib and Ring; ring and vibration come together. Ascending; ring gets louder and louder. None(Quiet); no ring, no vibration. Only lamp.
3.2 Message alert -Select mode Once/Every 2 mins/Every 5 mins/off Tone alerts that there is no message arrived in every 2 minutes / 5 minutes. -Tones Bell 1 / Bell 2 / Bell 3 Message Tone selection -Volume Ringing volume has total 8 steps (0~7). 3.3 Key Tone Setting: On/Off Tones DTMF / Voice / Bell 1 / Bell 2 / Bell 3 / Bell 4 / Bell 5 / Beep Key Tone selection (only applicable to the alphanumeric key) Volume There are 8 steps in volume (0~7). 3.
3.5 Sound effect Connection / Minute minder / Disconnection / Area alerting / On&Off melody / menu moving Melody plays when one of the checked conditions is satisfied. [detail description of sound setting] Setting the bell/vibration/volume Select the Sounding Setting in the Sound Menu, and scroll to the bell/vibration/volume by using Up/Down/Left/Right key. Press OK key to save the setting. If you do not want to store the setting, press CLR or END key.
Sound effect Connection tone sounds when the Outgoing Call is alerting. Minute minder sounds in every 1 minute while talking on a call. Disconnection alerts the release of the current Call. Area alerting sounds when the phone goes out of service area. On & Off melody sounds when the Phone is On/Off. Menu moving tone sounds when moving to another menu. Select a tone item by using Up/Down key, and set/reset with the Right/Left key. Press OK key to save the setting.
4. Settings You can change items below. 1. Display 1.1 Visual setting 1.1.1 Screen setting You can change each screen image as shown below. Idle screen image Mocall screen image Power On screen image Mtcall screen image Power Off screen image Dialing screen image To change the screen image, move to the screen you want by using left/right navigation key, move the cursor to the image change line by using up/down key, and choose an image by using again left/right key for the screen.
1.1.2 Screen option You can choose display options for the handset idle screen. There are three option and shown below. Screen option : you can change the display image of idle screen. Display string : you can change the string of the idle screen. Font color : you can change the font color in handset. To move to each option, use the up/down key. Screen option you can one of 4 images to be displayed by using left/right key. Normal image : display the image set in Screen setting.
Font color You can change the all text color in the handset. There are Red, Blue, Green, and Dark gray including default color. 1.1.2 Subscreen option You can choose display options for the handset sub screen. There are three option and shown below. Screen option : you can change the display image of sub screen. Voice equalizer : you can view equalizer image when you are calling. Auto backlight : backlight of sub screen turns on periodically. To move to each option, use the up/down key.
Font color Backlight of sub screen turns on periodically. 1.2 Greeting You can insert greeting message. 1.3 Contrast You can set Main LCD Brightness, Main LCD contrast, Sub LCD contrast. Use Navigation [UP/DOWN] Keys to move up and down to the mode you want to change and then use Navigation [RIGHT/LEFT] keys to change the value. Each has 8 levels.
1.4 Backlight You can set the Light Level of Main Sub LCD. Use Navigation [UP/DOWN] Keys to move up and down to the mode you want then use Navigation [RIGHT/LEFT] keys to change the value. 1. Light level (off, low, medium, high, maximum) A. You can set the brightness of LED Back light while it is on. 2. Minimal bright (off, low, medium, high) A. You can set the brightness of the LED Back light while it is off Duration is expired. (This value cannot be higher than the value of 3. Light duration A.
2.2 Set date Press OK key and store when you move the cursor to the date you want. 2.3 Set time zone Press OK key and store when you choose the time zone you want. 2.4 Display Set the time format as 12 hour or 24 hour. Set the date format as one of D:M:Y, M:D:Y, or Y:M:D. Choose the display as one of Time only, Date only, or Date & Time. Press OK key and store when you choose proper options.
3. Language Language Select the language to be displayed. choose one of lists, and press OK key. when choosing Automatic, it shows the Language Preference stored in SIM. 4. Reset settings Reset settings Restore the saved setting values into the default values. Input the handset password, and press OK key when the ‘Restore factory setting?’ pop up shows, the values are restored into the default values, and then the phone reboots.
5. Information 5.1 Own number You can input, edit, store, and delete your phone number. If there is no number stored, List empty shows. When press OK key in this state, it goes to the own number edit window. Input the numbers in the editor and press OK to store the number. If there is any number stored, press MENU key and select a menu you want. 1. Edit : modify and edit the number. 2. Add : add new number. 3. Delete : delete the number. you can input Own number up to 2 5.
5. Net Services 1. Divert calls Divert calls – With this options, you can redirect your incoming calls to another number predefined by you. Also you choose a forwarding rule to each service. 1. 1 All calls Divert all calls – You can redirect all of voice calls, data, fax and messages to another number. 1. 1. 1 On Select ON to direct all of the services provided by network, voice calls, data, fax, and messages. If you select “On”, you should enter a number to which you wish to direct.
1.2 When busy calls diverted when handset is engaged on another call – When your handset is already connected to a call, you can choose this option to be diverted to another number. You can set this as shown in 1.1[Divert All Calls]. 1.3 On no answer calls diverted when handset does not answer – This option allows you to divert the calls to a predefined number. When you cannot answer the phone in 5 seconds to 30 seconds (you should enter this timeout period), the call is diverted.
1. 5 Cancel all Cancel all the diverts you set – You can cancel all the diverts by using this option. 2. Call Settings Call settings – You can choose one of a number of features for controlling the way in which you make and receive calls. 2. 1 Answer type Answer type – When a call is incoming to your handset, you can choose the way you start to answer. 2. 1. 1 Flip open Select “Flip open” to connect a call by opening the flip. 2. 1. 2 Send key You can connect a call when you press [SEND] key. 2. 1.
2. 2 Call waiting Call waiting – Your handset can warn you when you’ve got a second call while you are already in a call. 2. 3 Caller number Show caller’s number or called number – You can see the number of the caller or you can show your number to the caller when some caller is making a call to you. And vice versa. 2. 3. 1 Show caller no This option shows the number of the handset making the incoming call 2. 3. 2 Hide your no You can hide your handset number when you’re making a call out. 2. 3.
2. 3. 4 Call settings -> Caller number -> Hide if called You can hide your handset number from any callers. This function overrides “Show caller no” 2. 3. 5 Call settings -> Caller number -> Caller name You can see the name matched to caller’s handset number if the number and its corresponding name is registered in your phone book. 3.Network settings (1) Preferred N/W With this function, you can set preferred list of network. This function has following sub-options to select.
that you like out of the available networks. [1] Automatic A network can be selected automatically. [2] Manual You can choose a specific network to subscribe. (4)Change password The network password is available from your network service provider. It is also used for setting Network Call Barring options and is not the same as your SIM card PIN1. 4.Security setting This menu selecting needs to enter the password at first time.
(2) Handset lock Your handset can be locked to prevent calls being made unless the correct handset lock code is entered when it is switched on. The handset will remain locked even if the SIM card is removed and replaced with another one. You can still make emergency calls while the handset is locked. This function has following sub-options to select. -Unlock -Call only - Lock -Change code (3) H/S barring You can control types of calls your handset makes and receives in a number of ways.
This feature is dependent on network service provider and subscription. Some of the bars are set by the network service provider. You can set the call barring service all or each services. It is possible to select a range of call barring options. At each range, you can see the status and set it On/Off. You’ll be prompted to enter network password when you change the setting. You can clear all settings of call barring.
- Data - Fax - Messages - All except msgs (5)Fixed dialing [1] Fixed dial -Enable : This option allows the user to only dial those numbers which match a set of “filters” stored in a list on the SIM -Disable : Select this option to disable the “Fixed Dialing” [REF] The PIN2 password is required when you turn it on or turn it off [2] Fixed dial list Display the Fixed dial list (6)CUG settings [1] List CUGs 1.CUG name list specified by the user is displayed 2.Select the CUG name 3.
6.Organizer In Organizer, you can set alarms, keep track of events, make notes, use a simple calculator, convert measures, and stop watch. 1. Alarm You can set alarms to ring for once, or on daily or weekly base. [Default screen without any alarm registered] Adding & Deleting alarms Press [Menu] key -> [OK] button. Fill in the alarm time and scroll down once to On/Off toggle bar. Then, decide On or Off. At the next scroll bar, you can set this alarm to ring just once, or daily or weekly base.
[ repeat type : Once] [ repeat type : Daily] [ repeat type : Weekly] If you choose [Once], then it will ring just once on the given Alert Date. If you choose [Daily], then it will ring every day at the given time. If you choose [Weekly], then it will ring on the weekdays you check by pressing Navigation Right [->] key. Selecting alarm melody, Press [Menu] key then you will see a popup menu where if you select [Melody], you can select alarm melody you like to hear.
Up to 5 alarms can be added. 2. Scheduler You can keep track of your events by putting short notes and alarms on the calendar. You will see a blue rectangular cursor on the calendar, which you can move around with navigation keys. [Calendar without any event set] Adding & deleting Events Move the blue rectangular cursor onto the date on which you want to put an event. Then press [Menu] key -> select [Add Event].
Then you will see following screens. – Use navigation keys to scroll up and down. 1) Event : You can choose the type of the event (Meeting, Call, restaurant, entertainment, birthday, Travel, and Others). 2) Memo : Press [->] to put a short note about the event. 3) Time : Set the alarm time. 4) Alarm alert : You can set when the alarm to ring (On time, 1Hour Before, 2Hour Before, 1Day Before, 2Day Before, and No alerting ) 5) repeat : You can set how often the event happens.
OK Æ MenuÆ Press [Menu] key and then you will see a popup menu. 1. Add Event : To add anther event on the selected day. 2. On D-day : Show you how many days are left until the event. 3, 4 Delete & Delete All : Deletes one or all of events registered on the selected day. 5. Memory Info : shows the number of events registered.
3. Memo You can keep short notes on your phone. Press [MENU] then you will see following sub menus. 1. Add : You can create a short note. 2. Delete : Delete the selected note. 3. Delete all : Deletes all notes. After you are done with writing, press [OK] key to save the note. You can edit notes by pressing [OK] key on the list view. You can keep notes up to 20.
4. Calculator Addition, subtraction, multiplication, and division of decimal numbers are supported. One of the four operators is selected with navigation keys. [Ok] key gives you the result of calculation. Press [*] Key to set point and [#] to toggle the sign of number. Example : [Keypad 6X5/2+2= 6], [Scroll Left], [5], [Scroll Right], [2], [Scroll Up], [2], [Ok Key] 5. Converter In Converter, you can convert measures such as Length, Area, Volume and Weight from one unit to another.
Select the result unit pressing navigation [Left] key or [Right] key. This converter displays the result value converted whenever entering the target value or changing the target unit/result unit. It is impossible some of units are converted. In that case, this converter displays the result value as zero. 6. Stop Watch You can time an event using this stopwatch function. The stopwatch can be operated with the navigation key.
7. Fun & Tools 1. Downloaded You can view a list of downloaded images and melodies and execute the basic file operation like browse, delete, rename, set as wallpaper, play, and view. 1. image file browser View a list of image files Browse image files using UP/DOWN key. © ª If you want file operation, then press MENU key and browse file operation you want using UP/DOWN key.
© ª View the full screen image. Set as wallpaper Press OK key after saving to wallpaper image. If you want to display wallpaper image then goto display visual option. View file information.
Delete the image file.. if the confirm window popuped, then press OK key. Don’t press any key and wait a moment if you want to cancel deleting. Rename the file Press OK key after modifying the file name.
2. Animation file browser View a list of animation image files Send via SMS refer the SMS 3.
2. Voice record You can record your voice or those of other people using this functionality. This is composed of the voice recorder and the voice player. So, you can record your voice with the recorder and then play it with the player. Using the key [MENU] on the voice memo view list, you can go into the voice recorder as the following picture. Basically, the voice recorder have the functionalities as RECORD / STOP / PLAY (PrePLAY) / SAVE.
3. Wap You can surf on Internet with WAP browser. That means you can connect to Internet anywhere, anytime. Contact to nearest dealer for detail information. 1) Home 2) Resume You can reconnect the latest web site. 3) Bookmarks You can store on Internet address with WAP browser. 4) Push messages Mobile can receive Push Messages from Service Provider.
5) Settings With this function, you can set Connection settings, Security certification, Cache mode, Push security.
A. Homepage : This is an address of homepage. B. Image : You can select image display option. C. Connection : You can select connection-orientation/connection-less or withsecurity / without security D. Gateway : This is an ID and password of Gateway E. Bearer : You can select bear type( Data / SMS / GPRS ) F. Data options ① IP address : IP address of Gateway ② Dial : Dial number ③ DataCall Type : ISDN/ analogue ④ Data Call Speed : 2400/4800/9600/14400 bps ⑤ Userid ⑥ Password ⑦ Timeout : 30/60/90/120 msec G.
(2) Security These are lists of Security Certification. (3) Cache mode You can set mode in two options(Always check/Never check).
3) Empty Temp File -Empty cache -Empty Cookies -Empty Password 4) Version info This function is to view the software version of WAP browser. 5) On-line menu If you press a menu key when browsing, browser menu will be available. Stop : stops current page download Go back : navigates back one page in the history list Bookmarks : presents the list of bookmarks Add bookmark : creates a new bookmark for the page you are viewing.
4. JAVA 5. Camera With the camera you can take pictures of people or events while on the move. The pictures are manually saved in the images application, where you can rename them and organize them in folders: [ Snapshot ] This menu allows you to take a picture. You can make it by pressing numeric ‘1’ key or selecting ‘Sanpshot’ on the camera menu. A. Process i) Access snapshot then you can see the preview mode. ii) Press ‘OK’ or ‘Side camera’ key to take a picture.
[ Sticker shot ] This menu allows you to take a sticker photo. You can make it by pressing numeric ‘2’ key or selecting ‘Sticker shot’ on the camera menu. A. Process The process is same with the Snapshot process. [ Album ] This menu allows you to manage the taken pictures. You can make it by pressing numeric ‘3’ key or selecting ‘Album’ on the camera menu. A. Album’s new mode has list mode and zoom mode. Press ‘OK’ key to move between the modes. B.
iii) Rename : Change the selected picture’s name. iv) Delete : Delete the selected picture. v) Delete all : Delete the whole pictures saved at the album. [ Setting ] This menu allows you to manage the taken pictures. You can make it by pressing numeric ‘4’ key or selecting ‘Settings’ on the camera menu. A. You can adjust various setting value related with camera using ‘Navigation’ key. Use ‘left-right navigation’ key to change the target. Use ‘up-down navigation’ key to change the target’s value.
8. Bluetooth 1) Turn on/off (1) On This is set Bluetooth feature enable. (2) Off This is set Bluetooth feature disable. 2) Paired devices Registration procedures can be required in prior of communication with other Bluetooth device. This registered device can be listed in this Paired devices. Action of each device can be displayed in Pop-ups. [Popup Menu] (1) Connect/Disconnect This menu can connect or disconnect Bluetooth device. (2) Add new device This is to add new device.
3) My headset This is to display registered headset list. A headset should be registered before it would be used. Each headset is controlled by Pop-up menus. [Popup Menu] (1) Connect/Disconnect A headset device can be connected or disconnected with this menu. (2) Add new headset This function is to add new headset. After detecting headset around mobile phone, available devices are displayed in list. If any device cannot be found, the message, “Unknown” is displayed and returns the previous menu.
9. STK The feature allows you to use a set of commands and procedures during the network operation of GSM.
[HOT KEY] Phonebook Phone book menu allows you to set up your own phone book. You can add or delete the records anytime you want. In addition, you are able to choose to save the records either in SIM card memory or phone memory. You can store up to 800 entries in the phone book. ※You can use the [Phonebook] menu by press navigation key (down key) in idle mode. (1) Group search You can search a person’s number registered to each group.
(2) Name Search If press Ok key, Search a person in the PhoneBook list by typing PINYIN or AlphaBet in the T9 Editor. If no input in the T9 Editor, show the total list of Phone Book. ok ok menu/select ‘Edit’ If the size of a Name overflows, it scrolls. Move to each phone number with navigation key. You can make a call with number listed first by pressing Send Key in a list.
Change to the View Name by pressing Ok Key in the list. It shows all of the information about the person, but can not modify the information. To modify the information, press Menu Key and select Edit. (3) Add New Name Add new phone number in the Edit mode. To edit the Name / PhoneNumber / Memo / Picture, move to the item and press any key on the item. You can select group / individual bell by pressing left or right navigation key. You select Picture, then go into Album.
(5) Settings 5-1) Save nos. to Select the memory for an item to be stored by pressing OK key. Memory choice will be one of the SIM card / Phone memory / Choice, etc. In the case of Choice, when you select Add New Name in the menu #3, the window asking which memory (Sim / Phone) you want will be shown. 5-2) Used space Show the memory currently used. Store total 500 entries to the phone book.
FCC & Industry Canada Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Your mobile device is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. Statement according to FCC part 15.21 Modifications not expressly approved by this company could void the user's authority to operate the equipment.
