User Guide

1312
You can select several options with Sub-LCD Menu. The Sub-LCD
options are shown below.
Normal Access
In standby mode with the phone flip closed, press and hold the
[ ] key, and a menu will appear. Scroll to the desired function
with the [ ]/[ ] key, then press the [ ] key to select the
function. After using the function, press and hold the [ ] key to
return to standby mode.
Recent Call
With this function, you can check and redial all recent calls.
(1) Scroll to “Recent Calls,”and press the [ ] key.
(2) After scrolling to the desired telephone number, press the
[ ] key to call the number automatically.(Telephone conversation
will be possible only with the use of an ear jack.)
(3) To return to standby mode, press and hold the [ ] key.
SMS Inbox
You can check the SMS messages received.
(1) Scroll to “SMS Inbox,”and press the [ ] key
(2) Scroll to the desired message and press the [ ] key to view
the message.
(3) To return to standby mode, press and hold the [ ] key.
Flash ON
The camera flash can be used as an emergency light.
1) On standby mode, press and hold the [ ] key to turn on the
flash.
2) Release the [ ] key to turn off the flash.
Alarm Indicates that an alarm has been set.
Roaming
Indicates that roaming service is supported.
Battery
Headset
Handset Lock
Shows remaining battery power.
Indicates that the headset has been connected.
Indicates that handset has been locked. To lock
the phone, press and hold . (“see 5.4.2”)
Divert Call
This icon appears when the function to divert
all calls is activated.
WAP push
message
Indicates that a WAP push message(s) has been
received.
Secure
Connection
Icon:
Indicates that the WAP connection is made via
secure connection.
GPRS Icon
Indicates that the GPRS service is being used.
Bluetooth
Indicates that the Bluetooth function has been
activated.
headset
connect
Indicates that the Bluetooth headset has been
connected.
GPRS
This icon will appear when you insert a SIM
card that supports GPRS function and when
your phone is in the GPRS service area.
Indicates that there is a recorded message(s) not
checked yet.
Auto-
Answering
Recorded
message
Indicates that the auto-answering function has
been activated. When recorded messaged are
saved to the full storage capacity (10 messages),
it changes to .
g800en07-2 2004.7.6 3:58 PM 페이지12