g800en07-2 2004.7.6 3:58 PM 페이지1 Display Dual clamshell TFT LCD both Main & Sub Main LCD ....: 260,000 TFT Color Display (128 X 160) Sub LCD ......
g800en07-2 2004.7.6 3:58 PM 페이지2 For your safety and proper operation of the mobile phone, please read the following information carefully and observe the simple guidelines provided. For detailed information, please refer to the Appendix. Antenna Do not use any antenna not authorized by Pantech. Using such antenna may cause malfunction or serious damage to the phone. Medical Devices Turn off your cell phone in healthcare facilities and make sure to observe facility rules and regulations.
g800en07-2 2004.7.6 3:58 PM 페이지4 User Guide Do not allow another person to use your phone without your permission. If the phone gets lost or stolen, contact your service provider immediately. If the phone does not function properly, take it to the nearest service center. Use only approved accessories and batteries. Do not attempt to connect incompatible devices. Avoid prolonged exposure to RF (radio frequency) signals emitted from the phone as it may adversely affect the human body.
g800en07-2 2004.7.6 3:58 PM 페이지6 FOR YOUR SAFETY ...........................................................................1 TABLE OF CONTENTS .......................................................................6 COMPONENTS ...................................................................................9 HANDSET DESCRIPTION .................................................................10 INTERNAL LCD (MAIN LCD) ............................................................11 SUB LCD MENU OPTIONS ..
g800en07-2 2004.7.6 3:58 PM 페이지8 BLUETOOTH ...................................................................................113 STK ..................................................................................................122 PHONEBOOK ..................................................................................122 For your safety and proper operation of the mobile phone, please read the following information carefully and observe the simple guidelines provided.
g800en07-2 2004.7.6 3:58 PM 페이지10 External display Antenna Earpiece Internal Screen display Menu key OK key Navigation key Clear key Alphanumeric keys Headset Connector Side keys Microphone Power Adaptor Connectors Camera There are two LCD displays: main-LCD and sub-LCD. One displays only icons to show the status of the phone while the other shows messages, telephone numbers, icons, or other information.
g800en07-2 2004.7.6 3:58 PM 페이지12 12 Alarm Indicates that an alarm has been set. Roaming Indicates that roaming service is supported. Battery Shows remaining battery power. Headset Indicates that the headset has been connected. Handset Lock Indicates that handset has been locked. To lock the phone, press and hold . (“see 5.4.2”) Divert Call This icon appears when the function to divert all calls is activated. WAP push message Indicates that a WAP push message(s) has been received.
g800en07-2 2004.7.6 3:58 PM 페이지14 The following table shows a list of function keys, each of which has one or more functions. Key Icon Name SEND KEY END KEY 14 Key Function Press this key to make a call or answer an incoming call when the answer type is ANY KEY & SEND KEY. If you wish to see the list of all recent calls, press this key once. Press this key to end a call or to convert to standby mode from menu mode. Press and hold this key to turn your phone on or off.
g800en07-2 2004.7.6 3:58 PM 페이지16 Installing SIM card Installing the Battery In order for you to use the phone the first time, you must follow the steps shown below. Install the SIM card inside the handset. When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription information (such as PIN number, available optional services, etc.). If necessary, turn off your phone by pressing and holding the [ ]key until a closing message appears.
g800en07-2 2004.7.6 3:58 PM 페이지18 18 Charging the Battery Turning your phone on Your phone is powered by a charged Li-ion battery. Use only authorized batteries and chargers. Ask your Pantech dealer for more information. You may use the phone while the battery is charging.
g800en07-2 2004.7.6 3:58 PM 페이지20 Ending a call If you wish to cancel or disconnect a call, press the [ close flip. Inputting characters and numbers ]key or Answering a call When the phone rings a melody or vibrates, the screen will display the name or telephone number of the caller, provided that you have been subscribed to your telecommunications service provider for such service. The caller's name will be displayed only when his/her telephone number and name are archived in the Phone Book.
g800en07-2 2004.7.6 3:58 PM 페이지22 Speed Dial There are two ways to make a call from the idle screen. The general method is to dial the destination number and press the [ ] key; the other is to use the Speed Dial function. The Speed Dial allows you to make a call quickly without dialing the actual phone number. If the index number which is allocated to each phone number saved in the Phone Book is within the range of 1~9, simply press and hold the index associated with the phone number that you wish to call.
g800en07-2 2004.7.6 3:58 PM 페이지24 Options during a call You may use different call options While you are on the phone, you may use the following call options by pressing the [ ]key. * T9 Input Mode: T9 input mode can vary depending on each language. For detailed information, see the country-specific manual. Key 1 [Menu] 1. Phonebook 2. Messages 3. Volume 4. Retrieve call in headset/phone 5. Hold 6. End current 7. Mute on 8. DTMF on/off Each function is described below.
g800en07-2 2004.7.6 3:58 PM 페이지26 T9 English The more types you enter,the more complete word you can get using T9 English editor. For example If you like to make the word, “English”, then press the keys, [ ] for E, [ ] for n, [ ] for g, [ ] for l, [ ] for i, [ ] for s, and [ ] for h. If you could not find the word what you want, just press [ ]key for next possible candidates. You can switch the lowercase to the capital letter or the capital letter to one capital letter mode by pressing [ ]key.
g800en07-2 2004.7.6 3:58 PM 페이지28 SMS/EMS EMS (Enhanced Messaging Service) is built upon SMS (Short Message Service) format. You can add pictures, animations, melodies and emoticons to a text message and designate text properties through EMS. Detailed functions of settings [MENU] 1.Message center 2.Message lifetime 3.Message format Before getting started First, check whether the service center number is set up. This number is usually provided by your service provider and stored in the SIM card. [MENU] 1.
g800en07-2 2004.7.6 3:58 PM 페이지30 Creating/Sending/Storing a message Creating a message Insert item Allows you to insert an item to a text message. 1. Choose the “Create” option and press the [ ]key. 2. While creating a message, you can choose the “Insert Items” by pressing the [ Text style You may change the properties of text messages. 1. Press the [ ] key while creating a message. 2. Choose “Text style” and press the [ ] key. 3. You can choose from Underline/Bold/Strikeout.
g800en07-2 2004.7.6 3:58 PM 페이지32 Sending the message Storing messages 1 After writing the message, press the [ 2 Choose “Send” and press the [ 3 You may input the recipient’s phone number, or retrieve the number from the “Phone Book” via the [ ] option. 4 After inputting the phone number, press the [ ]key to send the message. You will see a sending animation and the transmission progress (e.g. 1/3) on the screen. ]key. ]key. Storing messages in the SIM card 1.
g800en07-2 2004.7.6 3:58 PM 페이지34 Storing messages with attached files You may store Picture/Animation/Melody/Message/Emoticon in the phone memory if the received message contains them. (Only userdefined items are possible.) 1. Place the cursor behind the item while you check the message. 2. Press the [ ]key to set the file name and directory. 3. The message is stored in the handset. 4.
g800en07-2 2004.7.6 3:58 PM 페이지36 ※ Inbox and Outbox menu MMS [MENU] Edit - Edits received and sent messages. Delete - Deletes a message. Forward - Forwards a received message to another person. Text Reply - Writes and sends a new message with the sender’s number set as the default. Voice call - Makes a call to the sender’s number. MMS refers to multimedia messages including the files of the images taken with the digital camera, downloaded image files and sound files, which can be created and sent.
g800en07-2 2004.7.6 3:58 PM 페이지38 - WAP Profile : Sets the configuration of the WAP profile used when receiving or sending MMS messages. - MMS life time : Determines the lifetime of MMS messages. - MMS download : Automatic : New messages are downloaded onto the background as soon as they are received, and you receive notification when the download is complete. On read : New messages are downloaded when you open the file.
g800en07-2 2004.7.6 3:58 PM 페이지40 4 Adjusting the object properties of inserted images and sounds. – Object prop’s : Press the [ ]key and select "More." Then go through the following steps: ->Object prop’s” -> desired object (image, sound). Then press the [ ] key. This function allows you to set the time from which a message or image will be displayed or how long they will be displayed, from the time the current page is read or displayed. 5 Adjusting page properties.
g800en07-2 2004.7.6 3:58 PM 페이지42 Read Message and its functions 1 Choose a desired mailbox. 1 Select a mailbox. 2 Choose the message you wish to read and press the [ ]key or the [ ] key, and then select “Read.” 2 Select the message you wish to read and press the [ or press the [ ]key and select “Read.” 3 Press the [ 4 Select an object you wish to store and press the [ 5 Edit the file to be stored and press the [ 3 Press the [ ]key and choose “Select.
g800en07-2 2004.7.6 3:58 PM 페이지44 Moving a message Voicemail 1 Choose a desired mailbox. 2 Choose the message to be moved and press the [ 3 Select “Move to” to move the mail to the desired mailbox ] key. Editing a message 44 1 Choose a desired mailbox. 2 Choose the message to be edited, press the [ ]key and select “Edit.” The subsequent steps are as same as those for writing a message. 3 Follow the steps for writing a message.
g800en07-2 2004.7.6 3:58 PM 페이지46 Cell broadcasts Read info You can read cell broadcast messages sent by your network service provider. Settings – Enables you to select preferred topics and languages. Language – You can specify the language of a message. You may also add new languages or delete existing ones. With this function, you can maintain received calls, dialled calls, missed calls, clear logs, call info, and GPRS info.
g800en07-2 2004.7.6 3:58 PM 페이지48 SEND OPTION : If you wish to make a call to a number in the phone number list, move the status bar to a desired number by using the scroll up/down key, and then press the [ ]key. MENU OPTION : You may use the following options under the phone number selected by using the scroll bar. EDIT : You may use the “SEND OPTION” after editing the phone number selected by using the scroll up/down key.
g800en07-2 2004.7.6 3:58 PM 페이지50 Cost units All calls Allows you to set the basis cost per call in the service area. The following two options are available: Displays the airtime of all calls. - Read units : Read cost units. - Set units : Set the current cost unit and cost per unit Reset call time Resets the time recorded for Last Call or All Calls. Max cost Set the maximum value of a defined call cost via PIN2 authorization.
g800en07-2 2004.7.6 3:58 PM 페이지52 Clear logs You may set tones for ringing, messages, keys, flip opening, etc. Ringing Settings Clears the logs related to GPRS. Ring type Ringing tone : Operates the sound selected from Melody, Bell Sound, Voice Sound, Natural Sound, and My Melody. Vibration : Operates only in vibration mode. Vib then Ring : Vibrates and then rings. Vib and Ring : Vibrates and rings simultaneously. Ascending : The ringing volume keeps rising.
g800en07-2 2004.7.6 3:58 PM 페이지54 Message Alert Key Tone Select mode Settings Once / Every 2 mins / Every 5 mins / Off. If you select Every 2 mins/Every 5 mins, the message tone will ring every 2 mins/5 mins if a message has not been checked. On and Off functions of the Key Tone. Tones Tones DTMF/Voice/Bell 1/Bell 2 /Bell 3 /Bell 4 /Bell 5/Beep The Key Tone is applied to number keys: includes [ ] and [ The ‘Voice’ and ‘Bell 1’ options work only on the idle screen. ].
g800en07-2 2004.7.6 3:58 PM 페이지56 Flip Open Tone Sound Effect Settings Connection/Minute minder/Disconnection/Area alerting/On & Off melody/Menu moving This function provides a melody option for the selected item(s). (one melody) On and Off functions of the Flip open tone. Tones Bell 1/Bell 2/Bell 3 This is the melody that rings when you open your phone flip. (There is no melody when you close the phone flip.) Volume There are 8 different volume levels (0~7) available for volume adjustment.
g800en07-2 2004.7.6 3:58 PM 페이지58 [Operating Method] Bell/Vibration/Volume From the Sound Menu, select Sounding Setting. Select Bell/Vibration/Volume by using the [ ][ ][ ][ ] key. Press the [ ] key to save the selected item. If you do not wish to save, press the [ ] or [ ] key to exit the menu. ([ ]: exits to the previous stage. [ ]: exits to the idle screen) SMS Tone Setting Select the Message Alert menu. Select Mode/Tone/Volume by using the [ ][ ][ ][ ] key. Press the [ ] key to save the selected item.
g800en07-2 2004.7.6 3:58 PM 페이지60 This menu allows you to check or edit functions related to the screen, date, time, etc. Display Visual Setting Screen Setting You can move the select bar upward/downward by using the [ ]/[ ] key. In “Upward,” you can select a desired situation by using the [ ]/ [ ], and in “Downward,” you can select a desired image by using the [ ]/[ ] key. If you do not wish to change the image setting, press the [ ] or [ ] key to exit the menu.
g800en07-2 2004.7.6 3:58 PM 페이지62 You can change the colors of all texts used in your handset. The colors available are : default color, red, blue, green, and dark gray. Sub Screen Option Use the [ ][ ] key to select the idle screen among four different options. Normal image : Displays the image set in the Sub-screen Option menu. Analog clock : Displays the analog clock screen.
g800en07-2 2004.7.6 3:58 PM 페이지64 Backlight Date & Time Set time Sets the backlight level for the Main and Sub-LCD. Use the [ ][ ] key to scroll to a particular item and the [ ][ ] key to adjust the level. Light Level : Indicates the level of brightness of the backlight when it is turned on. There are four levels that can be set. (Off, Low, High, Maximum) Minimal Brightness : Set the brightness of the backlight when the Light Duration expires.
g800en07-2 2004.7.6 3:58 PM 페이지66 Display Reset settings You can set the time display format for your handset. Time format : Press the [ ][ ]key to change between the 12-hour format and 24-hour format. Date format : You can change the date display format to D:M:Y, M:D:Y, or Y:M:D. Display : You can set the time-related display. Choose between Time Only, Date Only, and Date & Time. This feature resets all current settings for the factory-set values.
g800en07-2 2004.7.6 3:58 PM 페이지68 Software version Response Time: You can set the response time, after which the answering machine becomes activated. One can choose a response time of 3 secs. 5 secs. or 10 secs. Allows you to check the software version of your handset. Auto power alarm If the alarm has been set through the “auto power alarm on/off” and the phone power turned off, the alarm will ring at the time set by the user while the phone power is turned on automatically.
g800en07-2 2004.7.6 3:58 PM 페이지70 Recorded message This key is selected to hear all recorded messages. To listen to the recorded messages, select the recorded message by moving the down/ up arrow key and press the [ ]key on the selected message. To delete the recorded message, press the [ ] key and select “Delete”. A maximum of 10 messages can be recorded in the answering machine. The answering machine will not work when the full storage capacity is reached (10 messages).
g800en07-2 2004.7.6 3:58 PM 페이지72 When busy When not found Diverting calls when busy This forwards incoming calls to another number set by you when you are on the phone. Diverting calls when out of range This forwards calls to a number designated by you if you are out of the network service range. You can set this function in the same manner shown in “Divert all calls”. You can set this function in the same manner shown in “Divert all calls”.
g800en07-2 2004.7.6 3:58 PM 페이지74 Call Settings Caller number Sets all additional options available for use when making or receiving calls. Answer type Displays the phone number or name of the calling or called party. This function depends upon whether or not you have subscribed to such service; and the settings of the caller. Show my no. Displays your own number. Sets the modes for answering incoming phone calls. Flip open : Answer the phone by opening your phone flip.
g800en07-2 2004.7.6 3:58 PM 페이지76 Network settings N/W selection Preferred N/W Setting to the preferred network – You can view the list of networks available to you. Press the [ ] key and you will see the following options. Insert : Insert: Inserts your preferred network to the top of the list. Added to end : Adds the network to the end of the list. Delete : Deletes the selected network item. This function allows you to prepare a list of network providers and select the preferred network provider.
g800en07-2 2004.7.6 3:58 PM 페이지78 Security settings To continue with this menu, you must first enter your password (PIN1). If you fail to enter the correct password three times in a row, the PIN1 will become blocked and you will return to the idle mode. Security settings allow you to block unauthorized personnel from using the phone. As such, you can bar services if your phone gets lost or stolen. You can change the passwords (PIN1 or PIN2) and set or cancel security settings.
g800en07-2 2004.7.6 3:59 PM 페이지80 H/S barring This function offers multiple methods to limit incoming or outgoing calls. In general, the barring service becomes activated by interoperating with the network, but H/S barring is made by the phone itself. Major functions are as follows: Incoming Rejects all incoming calls. You can set this function by selecting On/Off in the menu. Outgoing This function bars outgoing calls. You have three options for this function.
g800en07-2 2004.7.6 3:59 PM 페이지82 Outgoing calls Barring of All Outgoing Calls (BAOC) – Bars all outgoing calls. CUG settings List CUGs You will see a call list for which the barring function will be set. Select one item from the call list. Press the [ ] key. On : Sets barring on a desired call. Off : Releases the call that has been barred. Status : Shows whether or not the current call has been barred. Clear all Deactivates the barring items set via the [1-5] menu.
g800en07-2 2004.7.6 3:59 PM 페이지84 In organizer you can set alarms, record important events, make notes, use a calculator, use a stop watch function and convert measures. Alarm You can set alarms to ring for once, or on a daily or weekly basis. Adding and deleting alarms Press [ ]key -> then press [ ]key. Repetition type: once ,daily, weekly. If you choose [Once], then it will ring just once on the given Alert Date and Time. If you choose [Daily], then it will ring everyday at the given time.
g800en07-2 2004.7.6 3:59 PM 페이지86 Scheduler You may record an important event by setting a short note and alarms on the calendar. You can move the cursor by using the direction keys. Alarm alert : You can set when the alarm will ring. (Option: you can choose 'on time,' '1 hour before', '2 hours before', '1 day before' '2 days before' or 'no alerting'). Repeat : You can set how often the event happens, (Option: once, daily, weekly, monthly, or yearly.
g800en07-2 2004.7.6 3:59 PM 페이지88 Seeing all the events registered on the calendar Press [ Memo ]key and select [view all event] Allows you to keep short notes on your phone. Moving to a specific date Press [ ]key and select [Go to date] Press the [ ]key - > [ ]key. After you are finished with writing a note, press the [ the note. Press [ ], then you will see the following options. ]key to save Add : Creates a new note. Delete : Deletes the selected note. Delete all : Deletes all notes.
g800en07-2 2004.7.6 3:59 PM 페이지90 Calculator Converter Adding, subtracting, multiplying, and dividing of decimal numbers are supported. In converter, you can convert measures such as length, area, volume and weight from one unit to another. Basically ‘length’ includes cm, m, inch, feet, yard and mile. ‘Area’ includes sq. m, a, sq. feet, sq. yard and acre. ‘Volume’ includes cu. cm, cu. m, L, cu. inch, cu. feet, cu. yard, gallon. And ‘weight’ includes g, kg, t, grain, oz and pound.
g800en07-2 2004.7.6 3:59 PM 페이지92 Stop Watch You can time an event using the stopwatch function. Use the [ ]key to use the stopwatch function. Press ‘start’ [ ]to time an event, press ‘pause’[ ] to pause timing. Press ‘reset’ [ ]to clear the time and 'wait'. Game Photo Puzzle How to Play This game is a kind of Jigsaw puzzle. You can select a game type of your choice There are two different game types in the Photo Puzzle: Swapping and Sliding types.
g800en07-2 2004.7.6 3:59 PM 페이지94 Downloaded If you want to edit the image file, press [ ] key. When the file menu screen pops up, select the option you want and press [ ]. You can see the list of image and melody files downloaded through EMS/MMS or mobile services. You can also delete, change file names and see the file information, as well as change the wallpaper and view image files.
g800en07-2 2004.7.6 3:59 PM 페이지96 Animation Melody This is the list of the downloaded animation files (Animation wbmp files only. You can see animation gif files in the image menu.). You can see the size of the selected animation file at the bottom of the screen. Use the [ ][ ]key to select a desired file. (Please note that this function will be supported only when the animation size is width*height=255*255 and its file size less than 64Kbytes.
g800en07-2 2004.7.6 3:59 PM 페이지98 Voice record You can record your voice using the voice recording function. The voice recording function is comprised of [Voice record] for recording your voice and [Voice player] for playing the recorded voice. From the “Voice record” list screen, you can move to the [Voice record] by using the [Menu/Record] key. The [Voice record] offers the following functions: [RECORD], [STOP], [PLAY] and [SAVE]. You can surf the Internet using the WAP browser.
g800en07-2 2004.7.6 3:59 PM 페이지100 Connection F. GPRS settings 1. IP address: Gateway IP address 2. Access point: Access point name 3. User ID 4. Password G. Data settings 1. IP address 2. Dial number 3. Data call type 4. Data call speed 5. User ID 6. Password 7. Timeout Security cert These are the lists of Security Certification. A. Homepage : This is the homepage address. B. Image settings : Allows you to select image display options. C.
g800en07-2 2004.7.6 3:59 PM 페이지102 Empty temp File JAVA Empty Cache. Empty cookies. Empty password. Download Java application and run it. The java application used in your cell phone is called MIDIet. You can use the WAP browser to search the MIDIet you want, download it, and install it to your phone. *No MIDIet is included in the current model. Please download your desired MIDIet. Version info This function shows you the software version of the WAP browser.
g800en07-2 2004.7.6 3:59 PM 페이지104 104 3. Choose application by using the navigation key. 3. Use the navigation key to select the application to delete. 4.Select [ ]. You will see a pop up menu same as the following. Run: Runs selected application. Info: Deletes selected application from memory. Delete: Shows information of selected application. => Press Run to start game. 4. Select [ ]. You will see a popup menu same as the following. Run: Runs selected application.
g800en07-2 2004.7.6 3:59 PM 페이지106 Downloading java application 1. Use the WAP browser to select the MIDlet to download, and press the [ ] key. 3. Use the navigation key to select the application to see information on 2.The information of the selected MIDIet will show up on the screen. Press [ ] to view the popup menu. Download: Downloads the selected MIDIet. Cancel: Cancels download. 4. Press [ ]. A pop up menu will show up. Run: Runs selected application. Info: Deletes selected application from memory.
g800en07-2 2004.7.6 3:59 PM 페이지108 4. You can check the downloaded MIDIet in the Java option. Camera You can use the camera function to take pictures anytime and anywhere. You can view the pictures and edit file names by using the album functions. Snapshot Java Network Settings You may select the wireless information system method for the JAVA application. This is identical to the [setting] in the WAP option. 1. Menu -> [7] Fun & Tools -> press [5] => Same as above. 2. Select connection.
g800en07-2 2004.7.6 3:59 PM 페이지110 vi) Use the ‘side camera’ key while in the preview mode when the cell phone is closed. Use the ‘Volume Up’ key to control brightness and the’Volume Down’ key to end the snapshot function. Press ‘side camera’ key after taking a photo to save it. Press the ‘Volume Up’ key, then the photo will not be saved, but it will open up in preview mode. The snapshot function will end if you press ’Volume Down’. Sticker shot You will be able to shoot sticker photos using this function.
g800en07-2 2004.7.6 3:59 PM 페이지112 Bluetooth refers to either the specifications for connecting wirelessly various devices such as computers, mobile phones and home appliances, which are located within a short distance, and then enabling real time, bi-directional communication among them, or the products complying to those specifications. The mobile phone (model G800) supports the Bluetooth headset function, Dial Up Networking, and Serial Port Protocol and provides FTP server function.
g800en07-2 2004.7.6 3:59 PM 페이지114 - Delete Deletes registration. The related contents are deleted from the ‘paired devices list. - Set as authorized /unauthorized Authorizes/Unauthorizes the device. If the device has been “authorized”, access to the phone is allowed without any approval. This menu appears only when the registered device type is PC. This refers to other party’s accessing your device without an approval, and not your accessing the other party’s device(s) without an approval.
g800en07-2 2004.7.6 3:59 PM 페이지116 (2) Outgoing call device Before placing a call, select the device to be used. [1] Phone You can place a call in the normal way that you use your phone to make a call. [2] Headset You can place a call through the headset, provided that it has been successfully registered as the default headset. [3] Always ask As soon as you place a call, a popup message will appear asking you if you wish to use the headset. When you press the OK key, you make a call using the headset.
g800en07-2 2004.7.6 3:59 PM 페이지118 <<< How to use ‘G800 Bluetooth FTP server’ function >>> 1. Your mobile phone (G800) provides Bluetooth FTP server function. 2. In order to exchange files with your phone, the other party’s device must support Bluetooth FTP function. For instance, the FTP service function will be available in your phone if there is a laptop with Bluetooth function or a PC where devices such as a Bluetooth dongle is mounted. 3.
g800en07-2 2004.7.6 3:59 PM 페이지120 After selecting [Bluetooth Connection], right click to enter the [Configuration] at [Properties General], and uncheck [Enable hardware flow control], [Enable modem error control], and [Enable modem compression] entries. Select [Properties Networking Internet protocols (TCP/IP)], and then [Properties], enter [To receive IP automatically] for IP, and [Service Provider-specific DNS] for DNS. C.
g800en07-2 2004.7.6 3:59 PM 페이지122 STK is a service provided by the Network provider while you are using the GSM network. For detailed information, contact the Network provider which you are subscribed to. The Phonebook menu allows you to save a list of phone numbers of your choice. You may add or delete phone numbers anytime. In addition, you may select to save data either in the SIM card or phone memoryYou can save up to 1,000 numbers in the Phone memory, and up to 254 numbers in the SIM card.
g800en07-2 2004.7.6 3:59 PM 페이지124 The menu which appears when you press the [ Phonebook (when no icon is selected) ]key from the Photo search ]key from the When you select the Photo search, you will see a display of the the photo image list, which are linked to phone numbers in the phone book. When there no images linked, you will see a popup message, “list empty”. You can make call by selecting the linking photo image and pressing the [ ] key.
g800en07-2 2004.7.6 3:59 PM 페이지126 Speed Dial List Settings You can save up to 99 speed dial lists. Save nos. to When you move the cursor, the list name and the number automatically scroll. Press the corresponding number in the idle screen and press the [ ] key to move to the phone number registered in the speed dial list. To register a number in the speed dial list, press the MENU in the phonebook and select’add to speed’. Remember to press the [ ] key after you select the icon in the phone book list.
g800en07-2 2004.7.6 3:59 PM 페이지128 Group ring tones You can designate different melodies to different groups. You can organize your favorite menus. Register by selecting the [ key at the item you want to add ] 1. Registering in My Menu 1) Go to the menu you want to add. 2) Press the [ ] key. 3) When the ‘Add to My menu?’ window pops up, register it by pressing the [ ] key. 4) If you do not wish to register, press [ ] or [ ]. 2.
g800en07-2 2004.7.6 3:59 PM 페이지130 The following list shows how to maintain your cell phone along with precautions. Care and maintenance Troubleshooting Battery use Safety information Emergency calls 130 - Keep your cell phone and its accessories out of the reach of children. - Maintain your cell phone in dry condition and keep it under normal temperature. Temperatures higher than 55 C (131 F) or lower than -20 C (-4 F) may damage your phone. - Do not use or store your cell phone in dusty, dirty areas.
g800en07-2 2004.7.6 3:59 PM 페이지132 If you experience problems while using your mobile phone, please refer to the following checklist. If the problem persists, contact your dealer or nearest service center. When battery lifetime is shorter than usual: This may happen when you are in an area with low signal strength. Turn off your cell phone when it is not in use. Change the battery when battery energy is exhausted. When the “Insert SIM Card” message appears: Make sure the SIM card is correctly installed.
g800en07-2 2004.7.6 3:59 PM 페이지134 Your mobile phone is powered by a Lithium Ion (Li-ion) battery. The following Liion battery types can be used for your phone. (Contact your local dealer for more information.) - Standard-type battery. - Slim-type battery. Road Safety Remember that safety always comes first when you drive. Do not use the mobile phone while driving a vehicle. If unavoidable to use the phone, park the vehicle before making a phone call. Always secure the phone in its holder.
g800en07-2 2004.7.6 3:59 PM 페이지136 Important! Since this mobile phone, like any other wireless phones, operates by utilizing radio signals, wireless/wired networks and user defined functions, we cannot guarantee successful call connection in all conditions. Therefore, you should never rely solely upon a mobile phone in emergency situations (e.g. medical emergencies). In order to make communication by phone possible, you must turn on your phone and be within an appropriate signal range.
