G700 USER MANUAL
Characteristic Specification Display Clamshell TFT LCD. Main LCD : 65,000 TFT Color Display (128 X 128) animation message, variable Icon Melody On board Midi sound Dimension & Weight 80*40*20.
Caution For the safety of You and the proper operation of units, please ensure you read the guidelines that follow. For more details, please refer to the appendix. Antenna If you use antennas which are not approved by the manufacturer of the units, it may cause a malfunction or serious damage of the unit. Traffic safety Please ensure that you check out the traffic regulations on the use of mobiles beforehand. Do not use mobiles while driving. If required, please use a hands-free kit in safe conditions.
Please turn off your mobile in the public places where the use of mobiles is prohibited. In airplanes Please turn off your mobile before taking it on board an airplane. If you use your mobile in an airplane, it could dangerously impact on the function of the airplane. Explosive gas Please turn off your mobile in regions where any explosive gas is presumed to exist and then follow the instructions or the contents of sign boards.
Do not disassemble the mobile. Non professionals could damage the mobile. Ensure that you use only authorized or provided batteries, chargers, and accessories. If you use unauthorized products, the warranty could be voided.
Contents Caution Components Handset description Internal LCD (Main LCD) Function Keys Quick start Getting started Basic telephone functions Menu functions i. ii. iii. iv. v. vi. vii. viii. ix. x. Message Call logs Sound Settings Net service Organizer Fun & Tools STK Phonebook Hot folder Appendix - How to use T9 & etc.
Components The picture below is for the reference of users. Each item in the package could be different according to the policy of dealers.
Handset Description * For detail usage of key Earpiece LCD display Antenna Ear-microphone Menu key OK key Side keys Navigation keys Clear key Alphanumeric keys Microphone Power Adaptor Connectors
Internal LCD (Main LCD) The main-LCD is divided into two parts of screen. One screen lines up a group of icons showing the status of the unit, while the other screen shows messages, telephone numbers, icons, etc When a particular function is activated or a message is received, each applicatble icon is shown. The icons shown above are the maximum number of icons which can be displayed at the top. The definition of icons with pictures is explained as below.
Function keys Key Icon Name Key Function Press this key when you attempt to make or take calls. (Except for in the case when the receiving call is set as “Any Key Answer” type). SEND KEY Keep pressing this key for a moment when you want to recall the last number. Press this key once when you would like to check out the last called number. Press this key when you would like to end a call or convert to END KEY standby mode from Menu mode.
WAP KEY If you press this key in the initial screen, you can directly access the [WAP] Menu
Quick start If you use the unit for the first time, please follow the procedures as below. : Put the SIM card within the unit. If a user is registered to the network provider, he/she is supposed to be provided with a ‘plug-in SIM’ which contains the user’s registration information. (PIN, the existence of additional service, etc). If required, keep pressing the [END] key until the message of power off appears. 1. Separate the battery from the unit. 2.
Battery Installation As shown in the picture below, put the metal locators of the battery into the holes located in the bottom of the unit. 1. Insert the metal locators of the battery into the hole located in the bottom of the unit. 2. Press the Upper part of the battery until the sound of a ‘click’ is heard. Battery Recharging The power of the unit is supplied by the Li-ton battery charged. Ensure that you use only authorized batteries and chargers. For more details, please inquire at the nearest dealer.
Getting started 1. Unit power on Press the [END] key for a moment (approximately 3 seconds) in order to turn on the power of the unit. 2. Unit power off Press the [END] key for a moment in order to turn off the power of the unit. 3. Making calls Press the [END] key for a moment in order to turn on the power of the unit. If a message “Insert SIM card” appears, insert the SIM into the SIM slot.
If you would like to adjust the volume of conversations while using the unit, adjust the volume by pressing the volume key on the side of the unit for up to 8 steps as you wish. 7. Searching the main Menu If you would like to move to the main Menu in the initial screen, press the [Menu] key. Press the [End] key if you would like to escape from the Menu and return to the initial screen. You can select one of the items in the Menu by pressing the Navigation key [Up][left] and [Down][right].
Basic Telephone Functions 1. Speed Dial There are two ways to make a call in the initial screen. One is to press [Send] normally after inputting a telephone number. The other is to use speed dial. When making calls by using speed dial, you should press the index number for a moment which is allocated when saved in the Phone Book of the unit. Then, the telephone number matching the index number is attempted to be called.
you press the [OK] key, the information of the number selected will appear. 7. Holding calls (This function is available only for users who are registered to the internet service provider.) When taking calls, you can select a calling option by pressing the [MENU] key. [MENU] 1. Answer 2. Reject 3. I am busy If you take another call while talking on the phone, you can select one of the options according to your situation. Press the [End] key, if you would like to finish the current conversation.
Menu functions Menu Type The unit provides two different types of Menu. One is a basic main Menu and the other is a hot folder (short cut) Menu. The basic way to access to the main Menu is to press the To access the hot folder Menu, press the key or the key. key.
1. Messages 1. SMS/EMS EMS (Enhanced Messaging Service) is formed based on SMS (Short Message Service). You can create a text message (SMS) including pictures, animation, melodies, messages, and emoticons through EMS. The characteristics of the lettering can also be adjusted. Before starting You, first ensure that the number of the service center is set. This number is normally provided by dealers and saved in the SIM card. [MENU] 1. Create (writing message) 2. Inbox (received message) 3.
Settings’ detailed functions [MENU] 1. Message center 2. Message lifetime 3. Message format Message center – Authorization of the URL of proxy relay or set MMSC. Message lifetime –Adjustment of the lifetime of messages (1hour~6 months) Message format – General, fax, voice mail, ERMES, National paging, X.400, Internet) Used space detailed functions 1. Capacity 2. Used records 3.
1. Press the [OK] key after selecting the “Outbox” menu, then the list will be displayed. 2. Select a message in the list of the “Outbox” by pressing the [OK] key. 3. Press the [Menu] key when the selected message appears. 4. You can select a menu among the “Edit”, “Delete”, and “Forward” icons that pop up. * Menu of Inbox and Outbox [MENU] 1. Edit (editing) 2. Delete (deleting) 3. Forward (delivering) 4. Text Reply (replying) 5. Voice call (making calls) Edit – edits the messages received or sent.
Predefined – you can load the items saved in the phone memory. (This is not indicated in Picture/Message.) Load – you can load the items that you have saved in the file item. * The limitation of EMS file size Picture- 16*16 (pixels), 32*32 (pixels) Animation- 8*8 (pixels), 16*16 (pixels) Melody- 128 bytes * The limitation of EMS item extension (when Loading) Picture- *.wbmp Animation- *.awb Melody- *.imy Text style You can modify the properties of text messages. 1.
2. Press the [OK] key after selecting “Send”. 3. At this time, you can either input a number or bring out a number saved in the “phonebook list” through the [MENU] to transmit. 4. If you press [OK] after inputting a number, sent animation and sending progress (i.e. :1/3) is displayed. 3. Saving Messages Saving messages in SIM 1. Press the [OK] key after creating a message. 2. Press the [Ok] key after selecting “Save”. 3.
The maximum pages allowed in the creation of messages are 7 pages. Every time it turns to a new page, a sign (i.e. SMS1) pops up.
2.Voicemail [MENU] 1. Call 2. On 3. Off 4. Settings This function is for checking your voice mails by connecting to the voice mail box provided by network dealers. If you select Call menu, the system automatically attempts to connect to the voice mail box allocated to you. The details of each function are as follows. Call – Calls the voice mail box system allocated in order to check your voice mail. On – Makes a call at the voice mail box in order to start the voice mail service.
You can select the subject and language you prefer. - Language You can set the language of the information message. Adding or deleting a new language to the existing language is possible. When pressing the [OK] key in the list of language registered 1. Insert- adds a new language. The added language is displayed first. 2. Add to End -1. function is the same as Insert but the added language is displayed last. 3. Delete – deletes a language. - Setting title You can set the tile for information messages. 1.
This displays the list of missed calls and has the functions of edit, view call log, add to P-Book, and send SMS’ sub functions. In the call logs screen, place the state bar in the desired list by using the scroll up/down key and press the OK key, it will take you to the applicable list. If there is not saved contents in the selected list, a box saying “list empty” appears for about 2 seconds and automatically disappears, then return to the previous window state.
numbers already saved are not displayed in the “popupmenu”. SEND SMS: If you want to use SMS by using the numbers in the telephone list, place the status bar in the desired telephone number by using the scroll up/down key and press the MENU key to display the “popup-menu”. Then move the status bar to “SMS” by using the scroll up/down key and press the OK key. They will carry out the related functions.
[4] Cost units This is a function of setting a standard call within the service zone. You can select the two options as follows. -Read units: this reads Cost unit. -Set units: You can set current cost unit and price per unit. [5] Max cost You can set the maximum value of call costs in specified units through PIN 2 authorization. They have two options as follows. -Read limit: this reads the maximum units. -Set limit: this sets the maximum units.
3.3 Key tone 3.4 Sound effect 3.1 Ringing Settings Ring Type Ring; activates the selected Melody, Bell Sound, Voice Sound, Natural Sound, My melody. Vibration; activates in vibration Vib then Ring; rings bell after vibration. Vib and Ring; bell and vibration simultaneously rings. Ascending ; the sound of the bell increases. None (Quit); ramp activates without ringing bell or vibration Melody Type This consists of Melody/Bell Sound/Voice Sound/Natural Sound/My melody.
Tones DTMF/Beep Key Tone is applied to number key. Volume Adjust volume up to 8 levels (0~7) 3.5 Sound effect Minute minder/Area alerting/On&Off melody This activates melody which is checked. (only one melody is available) [Operation Method] Bell/ Vibration/ Volume Select Sound Setting under the Sound Menu Select Bell/ Vibration/ Volume by using the Up/Down/Left/Right key Save the selected one by pressing the OK key. If not wanting to save it, press the CLR or END key to escape from the menu.
Modified tones, for Key tone is applied only to number keys. Sound effect Connection is a tone played when you make calls (outgoing calls). Minute minder is a one minute reminder sound Area alert is a tone played when you are out of the service zone. On & Off melody is a tone played when you turn the unit On/Off. You can select each menu by using the Up/Down key. You can select Set/Reset by using the Right/Left key. You can save modified contents by using the OK key.
If you want to change the picture matching each situation, first place the select bar in the desired situation by using the Left/Right key. Then move the Select bar down by using the Down key. Last, select the desired picture by using the Left/Right key. If not wanting to change picture setting, press the CLR or END key to escape from the menu. 1.1.2 Screen Option You can set three screen options here. Screen option: select the kind of idle screen. Display string: modifies the string on the idle screen.
[greeting]. D-day: this indicates the schedule of D-day. You can input the D-day in the organizers scheduler. Font color You can modify the colors of all the letters used for the handset. The colors available are red, blue, green, and dark grey including basic colors. 2. Date & Time 2.1 Set time After pressing time, press the OK key, then you can set the current time.
2.2 Set date After placing the cursor in the desired date by pressing the navigation key, press the OK key. Then the current date can be set. 2.3 Set time zone 2.3 Set time zone After selecting desired time zone press the OK key. Then this reflects the current time. 2.4 Display In this menu you can set the time format to be displayed in the handset. Time format: you can convert 12 hours and 24 hours by pressing the Left/Right key. Date format: you can set the day format D:M:Y, M:D:Y or Y:M:D.
Language You can set language to be used in handset in this menu. After placing the scroll bar in the desired language to be displayed in the screen, press the OK key. Then the system will be converted into the applicable language. If you set automatic , the value set in the SIM you currently use will be automatically set. 4. Reset settings With this menu, all the values that you have saved in your handsets return to the initial values. After entering this menu, input the PIN of the handset.
number has been saved before, you will see List empty. At this state press OK to have an edit window where you can edit numbers. After inputting numbers, save them. Then the numbers will be saved in handsets. If there are numbers already saved, press the Menu key. Then select one of following functions. 1. Edit: modifies saved numbers 2. Add: adds new numbers. 3. Delete: deletes saved numbers. Own numbers can be saved up to 2. 5.
Divert all calls – sets other numbers to be diverted for voice call, receiving data, fax, message service. 1. 1. 1 On This sets call diversion for all calls. If you press On, the screen saying “Input a number to be diverted” will appear. After inputting a number to be diverted press the [OK] button. Then the screen saying “Input transfer time ranged from 5 to 30 seconds” will appear. After that press the [OK] button to be transferred to the network. 1. 1.
1.3 On no answer Call diversion when you do not take calls – this diverts calls to another number set when you can not take calls within 5 to 30 seconds set by them. The procedure of setting this is the same as the one explained in 1. 1 1. 4 When not found Call diversion when you are out of the coverage service zone – this diverts calls to another caller set when you are out of range. The procedure of setting this is the same as the one explained in 1. 1 1.
2. 1. 1 Flip open To take incoming calls, open the flip of the unit. 2. 1. 2 Send key To take incoming calls, press the [SEND] key. 2. 1. 3 Any key To take incoming calls, press any key except for the [SEND] and [END] key. 2. 1. 4 Auto answer For incoming calls, this will automatically connect after 10 seconds of ringing, 2. 2 Call waiting Call waiting – When the line is busy, this reminds you that another call is attempting to be connected if there is another call.
2. 3 Caller number Displays telephone number – this displays the numbers of names of receivers and callers. This function varies according to the settings such as the existence of your service registration, or of callers’ settings. 2. 3. 1 Show caller no This shows the callers’ number 2. 3. 2 Hide your no This hides you’ unit numbers from receivers when you make calls. 2. 3. 3 Show called no This displays the receivers’ unit number when you make calls.
- Insert: this adds the preferred net work to the top of the current list. - Added to end: this adds the preferred net work to the end of the current list - Delete: this deletes the contents of selected networks. Units have had the profiles of the various dealers of every country saved on them. This menu provides a function that you select and register to dealers by your preference. (2) Add new N/W Follow the following procedures in order to register a new network.
You select directly particular networks. (4) Change password You need to use your network password when you set the rejection of certain calls in the service net you registered. You can change your network password in this menu. 4. Security setting You should input your PIN1 in order to continue this menu after selecting it. If you input the wrong PIN1 3 consecutive times, PIN1 will be locked and the system goes to the status of IDLE.
-Call only: this allows general calls but restricting access to the menu by inputting a password onto the handset. - Lock: this allows only emergency calls and restricts access to menus or general calls by the input of the password of the handset. -Change code: you can change your handset password randomly. (3) H/S barring H/S barring is a function that you can restrict the attempts of making or receiving calls of the handset in various ways.
will be required. [1] Foreign calls Barring of Outgoing International Calls (BOIC)- this restricts all outgoing overseas calls. [2] Only Local/Home Barring of Outgoing Calls except those directed to the HPLMN Country (BOIC-exHC) – this allows only overseas calls outgoing Home PLMN and restricts other outgoing overseas calls. [3] Bar incoming Barring of All Incoming Calls(BAIC) – this restricts all receivied calls.
Fixed Dialing Numbers (FDN) is a function that only particular numbers are available in the telephone list saved in the SIM. When setting or canceling this function the inputting of the PIN2 password will be required. [2] Fixed dial list This displays the saved numbers of FDN. (6) CUG settings [1] List CUGs This displays the CUG name list inputted by you. After selecting CUG name, press the OK key, then the following functions are available.
6. Organizer You can alarm alert settings, record important events, make memos, use calculations, do unit conversions, use a stop watch, etc with this function. 1. Alarm [left] navigation key Æ 1.Alarm You can set an alarm ringing once on an alert day, or on a daily or weekly basis. [Status showing that no alarm is registered] Add and delete alarm alert Press [Menu] key -> [OK] key. 6.Organizer O Set alarm alert. The select by pressing On or Off.
If selected [Once], alarm rings once on alert date. If selected [Daily], alarm rings at set time everyday. If selected [Weekly], alarm rings at a set time on a particular day set by pressing the right navigation key [->]. Select alarm melody, If pressing [Menu] in Alarm Setting, you will see a popup window. Select [Melody] here to select alarm melody. If you tick the [On Morning Call] option, alarm will ring even if the handset is in . You can register a maximum 5 of alarms. 2.
Add and delete events After moving the cursor to the date you wish to put the event, press the [MENU] key. Then select [Add Event]. You simply press [OK] and [MENU] to select [Add Event]. Then, you will see the following screens. – By using the [up/down] navigation key, move up or down. By using the [left/right] navigation key, select option 1) Event: you can decide the kind of events.
If a new event is set on a particular date, this is displayed in the calendar. You can see the events registered at the bottom of the calendar with the date. You can see the details of the event by pressing the [OK] key. OK Æ MenuÆ If you press the [Menu] key, the popup menus will be displayed. 1. Add Event: this adds new events on the date selected 2, 3. Delete and delete all: this deletes an event or all events registered on the selected dates. 4. On D-day: this shows the days left until the event. 5.
3. Memo You can leave a brief memo in your handset. If you press the [MENU] key, sub menus as follows are displayed. 1. Add: this creates new memos. 2. Delete: this deletes selected memos. 3. Delete all: this deletes all the memos. After completing writing memos you can press the [OK] key in order to save the memo. By pressing the [OK] key in the memo list screen, the contents of the selected memo are displayed. A maximum of 20 memos can be left. 4.
[Ok Key], [Scroll Up], [2], [Ok Key] 5. Converter You can convert units such as length, width, volume, and weight into various units by using the converter. ‘Length’ includes cm, m, inch, feet, yard, and mile, ‘Width’ includes sq. m, a, sq. feet, sq. yard and acre. ‘Volume’ includes cu. cm, cu. m, L, cu. inch, cu. feet, cu. Yard, and gallon, and ‘Weight’ includes g, kg, t, grain, oz, pound, and keun. By using the [Left] or [Right] keys you can select one among length, width, volume, weight.
6. Stop Watch You can record events by using the stop watch. The stop watch is operated by the navigation keys. Press ‘Start’ to record events, press ‘Pause’ to pause time, and press ‘Reset’ to delete the time and wait. 7. Fun & Tools 1. Downloaded You can see the list of images and melodies files downloaded through EMS/MMS, mobile service, or PC sync.
This will display image files downloaded. Select desired image file by using the [search] key. (we do not support viewing over 256X256 sized images or viewing in a small screen at the bottom. Press the [Menu] key to carry out work regarding image files. When the file menu screen appears, select the desired menu by using the [Search] key and press the [OK] key. View – viewing image. Set as wallpaper - background screen registration.
Info – View file information – You can see basic file information, the number of horizontal and vertical pixels, and color resolution.
Rename – Change file names. Enter editor screen by pressing the [OK] key. After inputting the name you desire to change press [OK] to save it. You can escape from the file menu screen by pressing the [OK] key or the [END] key. 2. Animation This shows the list of animation files downloaded (applies to animation with wbmp format. You can see animation gif files at the Image menu.). You can see the selected animation file in a small screen at the bottom.
and vertical pixels, and color resolution. Delete – deletes files Rename – changes file names. Enter editor screen by pressing the [OK] key. After inputting the name you desire to change press [OK] to save it. You can escape from the file menu screen by pressing the [OK] key or the [END] key. 3. Melody This shows the list of melody files downloaded. You can see the size of selected melody files at the bottom. You can select desired melody files by using the [Searching] key.
you can connect internet anytime, anywhere. For more information, please ask nearest dealers. 1) Home 2) Resume This re-connects to web sites recently visited. 3) Bookmarks This saves internet addresses which have WAP browsers.
4) Push messages Handsets can receive ‘Push message’ from the service provider. . 5) Settings You can set functions such as connection setting, security certificate, Cache mode, and Push security. 5.
A. Data Option ① IP address: Gateway IP address ② Dial : Dial number ③ Data Call type: ISDN/ analogue ④ Data Call speed: 2400/4800/9600/14400 bps ⑤ User’s ID ⑥ Password ⑦ Timeout : 30/60/90/120 msec B. SMS Option ① Server number ② Service number C. GPRS option ① Ip address : IP address of gateway ② Access point : Access point number ③ User’s ID ④ Password 5.1.1 Home pages: This is the address of homepages. 5.1.
5.1.3 Connections: You can select directive/ nondirective connection when connecting to the wap. 5.1.4 Connections: You can select security/non security when connecting to the wap 5.1.5 Gateway: This is the ID and password of the gateway. 5.1.6 Bearer: You can select bearer type (Data/SMS/GPRS). 5.1.7 Setting option varies according to the bearer type set in 5.1.6.
You can select one mode among two options. (Always check/Never check) 5.
7) Version info This function displays the software version of the WAP browser. 8) On-line menu When browsing, press this menu key, then you can use browser menu. Stop: this stops downloading the current page. Go back: this moves to the previous page of the page in the history list. Bookmarks: this displays bookmarks. Add bookmarks: this creates current pages into a new bookmark. Enter address: this allows entering URL’s for browsing. Home: this returns to the beginning of current page.
8. STK STK is a service provided by service dealers while using the GSM net. For more information, please contact the service dealers you are registered to.
[HOT KEY] Phonebook Phonebook supports the function of saving the list of private telephone numbers. The addition and deletion of telephone numbers is always available. Besides this, you can select a desired saving space between SIM/Phone memories. A maximum of 500 telephone numbers can be saved. ※ If you press the down key in the IDLE screen, you can enter Phonebook. (1) Group search (1) Group search You can search telephone numbers by group with this function.
ok ok menu/select ‘Edit’ If a name is long, it is automatically scrolled. The movement of up and down is available by using the Navigation key and pressing the Send key in the list will connect to the applicable telephone number. You can save 3 different numbers (mobile, home, office) per person and move the icons lined in the right side of names by using Left/Right key. You can also connect calls by using the Send key.
•Delete (delete all numbers of the person) Menus appearing in Phonebook when pressing Menu key after selecting icons •Edit (edit the number) •Delete (delete the number) •Add to Speed (store the number to the Speed Dial) •Send Message (Menu to send SMS / EMS) Select each number with left & right navigation key. If you press the OK key, you can see saved contents in one screen. If wanting to edit, select Edit by using the Menu key. (3) Add New Name You can register new numbers in Edit mode.
list will be automatically scrolled. Pressing number (00~99) for a moment in the IDLE screen, will connect calls registered in the Speed dial list. If wanting to register desired numbers in the Speed dial list, press Menu key in Phone book list and select Add to speed. At this time ensure that you press Menu after selecting icons with the Left/Right key in the Phonebook list. Once entering the Speed dial list, move the cursor to the desired number and press the OK key.
5.3) Group ring tones You can assign different melodies by group. My Menu You can collect and edit your favorite menus. Register desired menus by pressing [Menu] key 1. Register My Men 1) Go to desired menu. 2) Press the [Menu] key. 3) Register by pressing the [Ok] key when a window saying Add appears. 4) When not wanting to register cancel by pressing the [End] or [Clr] key. 2. Use registered menu 1) Press the [Left] key in the IDLE screen. 2) Select the desired menu among the registered menus. 3.
4. Notes 1) My Menu can be registered up to 5 times. 2) Any menus requiring the input of a PIN can be registered. 3) STK menu can not be registered. 4) Some menus can be registered or run depending on the insert of the SIM card. 5) Menus under 3 sub trees can not be registered. FCC & Industry Canada Regulatory Compliance This device complies with Part 15 of the FCC Rules.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. Statement according to FCC part 15.21 Modifications not expressly approved by this company could void the user's authority to operate the equipment.
