FEATURE SPECIFICATIONS Display Dual clamshell TFT LCD (both internal and external LCDs) Internal LCD : 260,000 TFT Color Display (128 X 143) External LCD....: 260,000 TFT Color Display (96 X 64) Animated messages and icons Melody 64 poly orchestra musical bell sound Camera Highly sensitive digital camera with flash Dimensions & Weight 80*40*20.
FOR YOUR SAFETY For your safety and proper operation of the mobile phone, please read the following information carefully and observe the simple guidelines provided. For detailed information, please refer to the Appendix. Antenna Do not use any antenna not authorized by Pantech. Using such antenna may cause malfunction or serious damage to the phone. Traffic safety You should check and observe local traffic regulations before using your mobile phone. Do not use your phone while driving.
FOR YOUR SAFETY User Guide Do not allow other person to use your mobile phone without your permission. If the phone gets lost or stolen, contact your service provider immediately. If the phone does not function properly, take it to the nearest service center. Use only approved accessories and batteries. Do not attempt to connect incompatible devices. Avoid prolonged exposure to the RF (radio frequency) signals emitted from the phone as it may adversely affect the human body.
CONTENTS FEATURE SPECIFICATIONS ............................................................................1 FOR YOUR SAFETY..........................................................................................2 COMPONENTS COMPONENTS ....................................................................10 HANDSET DESCRIPTION ..............................................................................11 INTERNAL LCD (MAIN LCD) ..........................................................................
CONTENTS MEMO MY MENU .....................................................................................................152 Register My Men.................................................................................................152 Use registered menu ..........................................................................................152 Delete registered menus ....................................................................................153 Notes....................................
COMPONENTS HANDSET DESCRIPTION The pictures shown below are for general user reference only. Individual items of the mobile phone package may vary depending on the policy of your phone dealer.
INTERNAL LCD (MAIN LCD) There are two LCD displays: internal and external LCDs. One displays a group of icons to show the phone status, while the other shows messages, telephone numbers, icons, or other information. Main LCD Display An icon is displayed when a certain function is activated or a message is received. The figure above displays a list of all the possible icons that may be positioned at the top of the screen. The function of each icon is described below.
FUNCTIONAL KEYS FUNCTIONAL KEYS The following tables shows a list of function keys, each of which has one or more functions. Key Icon Name Function keys Key Icon Name SEND KEY 14 If you press this key in the initial screen, you can directly access the [Camera] Menu. SIDE CAMERA KEY If you press this key when the phone flip is closed, you can directly access the [CAMERA Preview] mode. WAP KEY Press and hold to enter Etiquette (vibrate) Mode.
QUICK START QUICK START Installing the Battery In order for you to use the phone the first time, you must follow the steps shown below. Install the SIM card inside the handset. When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription information (such as PIN number, available optional services, etc.) If necessary, turn off your phone by pressing and holding the [ ] key until the power-off message appears.
MEMO GETTING STARTED STARTED Unit power on (turn on the phone power ) Turning your phone off Making calls Ending a call Answering a call Adjusting the earpiece volume Searching the main Menu Inputting letters and numbers 18 19
UNIT POWER ON (TURN ON THE PHONE POWER ) Press the [ ] key or close the phone flip if you wish to cancel or end your call. TURNING YOUR PHONE OFF Press and hold the [ 20 MAKING CALLS Press and hold the [ ] key to turn your phone on. When the “Insert SIM card” message appears on the screen, insert the SIM card into the SIM slot. Enter your PIN number (up to 8 characters) to unlock the handset (if applicable).
ADJUSTING THE EARPIECE VOLUME ENDING A CALL If you wish to cancel or end your call, press the [ ] key. ANSWERING A CALL When the phone rings a melody or vibrates, the screen will display the name or telephone number of the caller, provided that you are subscribed to your telecommunications service provider for such service. The caller’s name will be displayed only when his/her telephone number and name are archived in the phonebook. If you wish to answer a call in normal mode, simply press the [ ] key.
INPUTTING LETTERS AND NUMBERS To input a number, press the number keypad associated with the number you wish to input. To input a number in the phone, you must be in “T9” mode (i.e. Phone book, Message). For more details, please refer to the “T9” page. If you would like to delete a wrongly inputted letter, press the [ ] key and to delete an entire line of text, press and hold the [ ] key. If you press and hold the [ ] key, all the letters in the screen will be deleted.
SPEED DIAL There are two ways to make a call from the initial screen. The general method is to dial the destination number and press the [ ] key; the other is to use the Speed Dial function. The Speed Dial allows you to make a call quickly without dialing the actual phone number. If the index number which is allocated to each phone number saved in the Phone Book is within the range of 2~9, simply press and hold the index associated with the phone number that you wish to call.
ACCESSING THE PHONEBOOK DIRECTLY FROM THE INITIAL SCREEN To access the phonebook submenu directly without going through the main menu, press [ ] from the direction keys. CALL WAITING (To use this function, you must subscribe to the service with your network service provider.) On an incoming call, press the [MENU] key to select one of the following call options. [ ] 1. Answer: Accepts an incoming call. 2. Reject: Ends an incoming call without accepting it. 3.
OPTIONS DURING A CALL While you are on the phone, you may use the following options by pressing the [ ] key. HOW TO USE T9 T9 helps you enter English and Chinese characters easily. This chapter explains how to use T9. You will see the following T9 modes once you are in the INPUT MODE. Key T9 Number T9 English 1 Next candidate Smart punctuation . ‘ : 1 / ) °© ( ; *?& ABC2 [Menu] 1. 2. 3. 4. 5. 6. 7.
T9 GUIDELINE T9 input mode T9 GUIDELINE explanation English input mode English input mode by pressing multi-cap key T9 English In the T9 English editor, basic usage is the same as using a computer keypad. For example, to write ‘hello’, type [ ][ ][ ][ ] [ ] where each number represents an alphabet. If you cannot find the desired character, you can get a list of candidate characters by pressing the [ ] key. To shift between lower case and upper case letters, press [ ].
T9 GUIDELINE T9 number and T9 Symbol You can input numbers or signs in this mode. Signs are selected in the option window. Menu functions Menu Type The unit provides two different types of Menu. One is a basic main Menu and the other is a hot folder (short cut) Menu.The basic way to access to the main Menu is to press the key. To access the hot folder Menu, press the key. To access the camera menu, press the key.
MESSAGES SMS/EMS EMS (Enhanced Messaging Service) is built based on SMS (Short Message Service). You can create a text message (SMS) including pictures, animation, melodies, messages, and emotions through EMS. The characteristics of the lettering can also be adjusted. MESSAGES Settings’ detailed functions [ ] 1. Message center 2. Message lifetime 3. Message format Before getting started First, check whether the service center number has been set up.
MESSAGES MESSAGES Inbox (received messages) Archive 1 If you press the [ ] key after selecting the ‘Inbox’ Menu, the list will then be displayed. The list displays caller’s numbers corresponding to the names saved in the Phone Book. 1 Select the “Archive” menu and press [ saved message list. 2 Press the [ ] key among the list of the “Archive”. The size of the data is indicated under the message. 2 Press the [ ‘Inbox’.
MESSAGES MESSAGES Predefined - you can load the items saved in the phone memory. (This is not indicated in Picture/Message.) Load - you can load the items that you have saved in the file item. Archive Menu [ ] 1. View (check messages) 2. Info (message information) 3. Delete (delete) 4. Rename (save messages with other names) The limitation of EMS file size Picture- 16*16 (pixels), 32*32 (pixels) Animation- 8*8 (pixels), 16*16 (pixels) Melody- 128 bytes View - checks the messages saved in the Archive.
MESSAGES MESSAGES Sending Messages 1 Press the [ ] key after creating a message. 2 Press the [ ] key after selecting ‘Send’. 3 4 At this time, you can either input a number or bring out a number saved in the ‘phonebook list’ through the [ ] to transmit. If you press [ ] after inputting a number, sent animation and sending progress (i.e. :1/3) is displayed. Saving Messages Saving messages in SIM 1. Press the [ ] key after creating a message. 2. Press the [ ] key after selecting ‘Save’. 3.
MESSAGES MMS MESSAGES - Spam filter: sets spam filter for the MMS messages set as °∞Advertisement°±. Off : receives all the MMS messages MMS is a multi-media message to create and send which includes image files taken by camera or downloaded and sound files downloaded. The size allowed for each file is 32KB, and the total size of messages should not exceed 64KB. Structure of Menu MMS - Create : new messages are created and sent. - Inbox : displays received messages.
MESSAGES Delete object select [ ] key -> “Delete object” in order to delete inserted objects. After selecting desired object, delete it by pressing the [ ] key. Apply template : Re-create the current page by using the saved template. 4 You can adjust the object properties of images and sound inserted. Object properties : after pressing the [ ] key select More->Object properties and press the [ ] key after selecting the desired object (image, sound).
MESSAGES MESSAGES Play: this plays images or sounds of the current page ( this function activates when the messages consists of more than 2 pages.) Play from start: this plays images and sounds from the first page ( this function activates when the messages consist of more than 2 pages.) Step forward a page, Step back a page : this moves forward or backward a page. You can carry out the same function with the right/left key of the handset key pad. Edit : this edits messages.
MESSAGES Voice mail MESSAGES Cell broadcasts This function is for checking your voice mails by connecting to the voice mail box provided by network dealers. If you select Call menu, the system automatically attempts to connect to the voice mail box allocated to you. Reading information (Read info) The details of each function are as follows. You can read the message of Cell Broadcast provided by your network service. Call - Calls the voice mail box system allocated in order to check your voice mail.
CALL LOGS CALL LOGS You can set Received calls, Dialed calls, Missed calls, Clear logs, Call timers, Call costs Missed calls Received calls This displays the list of missed calls and has the functions of edit, view call log, add to P-Book, and send SMS. This displays the list of received calls and has the functions of edit, view call log, add to P-Book, and send SMS.
CALL LOGS ADD TO P-BOOK : If You want to save desired numbers to the phone book by using the “add to P-Book” function, place the status bar in the desired numbers by using the scroll up/down key and press the MENU key to display the ‘popupmenu” Then move the status bar to the “add to P-Book” by using the scroll up/down and press the OK key. They will carry out related functions and the telephone numbers already saved are not displayed in the “popup-menu”.
CALL LOGS Call timers CALL LOGS GPRS Info This is a function to read the information on call times. Last call This displays the time lapse of the latest call. Current connection (GPRS current) Dialled calls This displays the time lapse of the Dialled calls. Received calls This displays the time lapse of the Received calls. All connections All calls This displays the total lapsed time of all calls This displays what You recently have received or sent in kilo bites by using GPRS.
SOUND SOUND You can set the sound of bells, messages, keys, flip. etc. Melody Type Ringing settings Ring Type Ringing tone; activates the selected Melody, Bell Sound, Voice Sound, Natural Sound, My melody. This consists of Melody/Bell Sound/Voice Sound/Natural Sound/ My melody. There are many melodies and 24 melodies are provided ( subject to the model of unit). Ringing volume Adjust volume up to 8 levels (0~7) Vibration : activates in vibration Vib then Ring : rings bell after vibration.
SOUND Message alert SOUND Key Tone Settings Select mode Once/Every 2 mins/Every 5 mins/off If selecting Every 2 mins / Every 5 mins, the message tone rings every 2 mins / every 5 mins when there are messages unchecked . Tones Select one of message tones among Bell 1/Bell 2/Bell 3 volume this consists of On/Off. Tones DTMF/Voice/Bell 1/Bell 2 /Bell 3 /Bell 4 /Bell 5/Beep Key Tone is applied to number key. Voice and Bell 1 activate only in the Idle screen.
SOUND SOUND Flip open tone Sound effect Connection/Minute minder/Disconnection/Area alerting/ On & Off melody/menu moving Settings This activates melody which is checked. (only one melody is available) this consists of On/Off. Tones Bell 1/Bell 2/Bell 3 This is a melody ringing when opening Flip. (no melody for shutting flip) volume Adjust volume up to 8 levels (0~7) [How to Operate] Bell/ Vibration/ Volume Select Ringing settings (Sound Setting) from Sound menu.
SOUND Key Tone Setting Select Key Tone menu Select Setting/Tone/Volume by using the Up/Down/Left/Right key. Save the selected one by pressing the OK key. If not wanting to save it, press the CLR or END key to escape from the menu. CLR: move to the previous page END: return to the IDLE screen Modified tones, for Key tone is applied only to number keys. Flip Open Tone Select Flip Open Tone menu. Select Setting/Tone/Volume by using the Up/Down/Left/Right key. Save the selected one by pressing the OK key.
SETTINGS SETTINGS You can modify or confirm the settings of the screen, date, time, etc in this menu. Screen Option Display You can set three screen options here. Visual setting Screen setting You can set each picture as shown below. Screen option : select the kind of idle screen. Display string : modifies the string on the idle screen. Font color : modifies the color of letters.
SETTINGS Display string You can select one which will be used for the idle screen among the three options by using the LEFT/RIGHT key. Time&Date: this displays the current date and time. You can modify the setting in [setting]-[date&time]-[display]. Greeting: this indicates the Greetings which You personalize. The message of Greetings can be set in [setting]-[display]-[greeting].
SETTINGS Greeting If you set greetings, the greetings of animated pictures are displayed instead when the handset is turned on as well as the IDLE screen. You can set by following [setting]-[display]-[visual setting]-[screen option]. SETTINGS Backlight You can set the backlight levels of the internal and external LCDs. First, position the Select Bar on the desired feature that you wish to set, and then use the Left/Right key to adjust the values.
SETTINGS Date & Time SETTINGS Set date After placing the cursor in the desired date by pressing the navigation key, press the [ ] key. Set time After pressing time, press the [ ] key, then you can set the current time. If the time is 12 hour format, the conversion of am, pm can be done by pressing the * key of the handset 72 Press [ ] or [ ] to switch to a different month.
SETTINGS SETTINGS Set time zone After selecting desired time zone press the Then this reflects the current time. Language key. You can set language to be used in handset in this menu. After placing the scroll bar in the desired language to be displayed in the screen, press the OK key. Then the system will be converted into the applicable language. , If you set automatic, the value set in the SIM you currently use in the phone will be automatically set.
SETTINGS Information SETTINGS Software version You can check the Software version of the phone you currently use. Own number You can input, save, and edit your own Phone numbers. If no number has been saved, you will see “List empty”. At this state press OK to have an edit window where you can edit numbers. After inputting numbers, save them. Then the numbers will be saved the phone. If there are numbers already saved, press the Menu key. Then select one of following functions. 1.
SETTINGS Answering machine A unique feature of Pantech mobiles is the Answering Machine function, which allows a user to record up to 10 messages. The user can also overhear the recording and can choose to accept or reject the call. SETTINGS Meeting: “I am in a meeting right now, please leave a message after the tone.” Driving: “I am driving right now, please leave a message after the tone” The next menu (4.7.2) describes how to create your own response message.
SETTINGS SETTINGS Recorded message Pantech phones have a unique feature with which a voice call or a SMS message can be made or sent to the person who left a message. To access this function, select the recorded message to which the voice call/ SMS needs to be made or sent, then press the [Menu] button, and select “Call” or “Send message”. This feature allows you to hear all the recorded messages.
NET SERVICES NET SERVICES When busy Divert calls Divert calls - diverts calls to another number according to user’s settings. Call diversion when line is busy - this diverts calls to another number set when a user’s line is busy. The procedure of setting this is the same as the one explained in 1.1. All calls Divert all calls - sets other numbers to which voice calls, receiving data, fax or message service are diverted. On : This sets call diversion for all calls.
NET SERVICES When not found NET SERVICES Call Settings This sets additional functions used for making or taking calls. Call diversion when you are out of the network service area. - This diverts calls to another number set when you are out of the network service area. The procedure of setting this is the same as the one explained in 1. 1 Answer type Answer type - sets the incoming call receiving mode. Flip open To take incoming calls, open the phone flip.
NET SERVICES Call waiting NET SERVICES Network settings This alerts you that there is another call coming in when you are already in a conversation with a caller. Preferred N/W Set preferred Network - When the network list currently provided by handset is displayed, press the [MENU] key. Then the sub options as follow will appear. Caller number Displays telephone number - this displays the numbers of names of receivers and callers.
NET SERVICES N/W selection With this function, you can select your preferred dealers among the list of available networks you make after connection Automatic : This automatically selects networks. Manual : You select directly particular networks. Change password You need to use your network password when you set the rejection of certain calls in the service net you registered. You can change your network password in this menu.
NET SERVICES NET SERVICES Handset lock H/S barring You can set your handsets to be locked when you are turned on and input wrong PINs so that the handsets cannot be used. Once handsets are locked, even if the SIM cards are replaced with others, the lock continues. However, emergency calls can be made even in the lock state of handsets. Also this function can be carried out by pressing the [#] key for a moment in the IDLE screen. If you press the [#] key in the lock state, the handset will be unlocked.
NET SERVICES NET SERVICES N/W barring This function is decided according to the existence of service dealers or subscribers’ selection. You can individually set the whole group of basic services or each group just like call diversion services (Call Divert). You can individually set On/Off regarding (1) All services, (2) Voice calls, (3) Data service, (4) Fax service, (5) Message service and (6) All services except message services. If changing settings, the inputting of the PIN will be required.
NET SERVICES ORGANIZER You can alarm alert settings, record important events, make memos, use calculations, do unit conversions, use a stop watch, etc with this function. CUG setting PASSWORD Alarm You can set an alarm ringing once on an alert day, or on a daily or weekly basis. List CUGs This displays the CUG name list inputted by you. After selecting CUG name, press the key, then the following functions are available. Add: this adds a new CUG name inputted by you at the end of the CUG name list.
ORGANIZER Select alarm melody, If pressing [Menu] in Alarm Setting, you will see a popup window. Select [Melody] here to select alarm melody. Selecting [On MorningCall] will ring the alarm even when the phone is in . ORGANIZER Scheduler By setting a brief memo and alarm to the desire date, you can record important events. Add and delete events After moving the cursor to the date you wish to put the event, press the [MENU] key. Then select [Add Event].
ORGANIZER 1) Event: you can decide the kind of events. (option: meeting, call, restaurant, entertainment, birthday, travel, others) 2) Memo: by pressing the [right] [left] navigation key or [Number] key, you can input memos. 3) Time: records event time. 4) Alarm alert: this decides when the alarm alert for the above events recorded. (option: on time, 1 hour before, 2 hours before, 1 day before, 2 days before, no alerting can be selected) 5) Repeat: this sets the frequency of events.
ORGANIZER ORGANIZER Calculator Memo You can leave a brief memo in your handset. If you press the [ ] key, sub menus as follows are displayed. 1. Add memo: this creates new memos. 2. Delete: this deletes selected memos. 3. Delete all: this deletes all the memos. After completing writing memos you can press the [ ] key in order to save the memo. By pressing the [ ] key in the memo list screen, the contents of the selected memo are displayed. A maximum of 20 memos can be saved.
ORGANIZER ORGANIZER Converter Stop Watch You can convert units such as length, width, volume, and weight into various units by using the converter. “Length” includes cm, m, inch, feet, yard, and mile ‘Area’ includes sq. m, a, sq. feet, sq. yard and acre. ‘Volume’ includes cu. cm, cu. m, L, cu. inch, cu. feet, cu. Yard, and gallon, and ‘Weight’ includes g, kg, t, grain, oz, pound. By using the [Left] or [Right] keys you can select one among length, width, volume, weight.
FUN & TOOLS If your phone has JAVA function, please see P123. Thank you. Game MagicBall In the mediaeval times, a witch kidnaps the girl friend of the hero. He has to save her soon. So his journey to save her starts fighting with the obstructing characters made by the witch. FUN & TOOLS Combat A brave knight, the hero of ‘Combat,’ fights against malicious monsters to defend his nation. He can attack the monsters by shooting 3 types of weapons: big rock, cold-volt and fireball.
FUN & TOOLS FUN & TOOLS Downloaded You can see the list of images and melodies files downloaded through EMS/MMS, mobile service, or PC sync. You can also carry out basic work such as deleting each file, changing file names, and viewing file information, and background screen registration, view image, etc. This will display image files downloaded. You can see the selected image file in a small screen at the bottom. Select desired image file by using the [search] key.
FUN & TOOLS Set as wallpaper - registers the selected image as a background screen. After pressing the [ ] key, please wait until the progress bar is completed. FUN & TOOLS Delete - deletes files Rename - Changes the name of a selected file. Enter editor screen by pressing the [ ] key. After inputting the name you desire to change press [ ] to save it. Info - View file information - You can see basic file information, the number of horizontal and vertical pixels, and color resolution.
FUN & TOOLS FUN & TOOLS Animation Melody This shows the list of animation files downloaded (applies to animation with wbmp format. You can see animation gif files at the Image menu.). You can see the selected animation file in a small screen at the bottom. You also can select desired animation files by using the navigation key (we do not support viewing over 256X256 sized images or viewing in a small screen at the bottom). Press [ ] key in order to carry out works regarding animation files.
FUN & TOOLS Voice record You can record your voice by using this function. This function consists of two functions; one is to record you’ voice and the other is to replay the recording. You can enter Voice recorder by using [MENU/Record] in View voice list FUN & TOOLS Press the [RECORD] key to record your voice, and save the recording by pressing the [SAVE] key. During recording, you can stop the recording by pressing [STOP] key and save the recording by pressing the [SAVE] key.
FUN & TOOLS FUN & TOOLS Bookmarks Wap You can store Internet addresses which have WAP browsers. 1 You can surf the internet using the WAP browser. This means that you can be connected to the Internet anywhere, any time. For detailed information, ask your local dealer. Press [ ] Push messages Your phone can receive °ÆPush message°Ø from your service provider.
FUN&TOOLS FUN&TOOLS D.Gateway settings : This is the ID and password of the gateway. E. Bearer: You can select bearer type (Data/GPRS). F. Data Option IP address: Gateway IP addresss Dial : Dial number Data Call type: ISDN/ analogue Data Call speed: 2400/4800/9600/14400 bps User’s ID Password Timeout : 30/60/90/120 msec G. GPRS settings Ip address : IP address of gateway Access point : Access point number User’s ID Password Security This displays the list of security certificates. A.
FUN&TOOLS Push security FUN&TOOLS Version info -Applies to all -Applies to only certified -Do not apply This function displays the software version of the WAP browser. On-line menu If you press the MENU key when browsing, you will be able to use the browser menu. Empty Temp File 1 Press [ -Empty Cache -Empty Cookies -Empty Passwords ] Stop: Stops downloading the current page. Go back: Moves to the previous page of the page in the history list. Bookmarks: Displays bookmark list.
FUN&TOOLS Snapshot You can take photos by selecting this menu. You can carry out the function by pressing “1” in the Camera menu or selecting “Snapshot”. FUN&TOOLS Stickershot You can take sticker photos by using this function. You can run this function by pressing either “2” in the Camera menu or selecting “Sticker shot”. Function This is the same as Snapshot. A. Function i) Select Snapshot to run preview mode. ii) Take photos by using “OK” or “Side camera” key.
FUN&TOOLS Setting You can set the environment related to the Camera by selecting this menu. This function can be carried out by pressing the “4” key in Camera menu or selecting “Settings”. A. You can modify various setting values related to the camera by using the “Navigation” key . Select objective by using the “left-right navigation” key . Modify the setting values of selected objects by using the “updown navigation” key .
FUN & TOOLS FUN & TOOLS This will display image files downloaded. You can see the selected image file in a small screen at the bottom. Select desired image file by using the [search] key. (we do not support viewing over 256X256 sized images or viewing in a small screen at the bottom. Press the [Menu] key to carry out work regarding image files. When the file menu screen appears, select the desired menu by using the [Search] key and press the [ ] key.
FUN & TOOLS Delete - deletes files Rename - Changes the name of a selected file. Enter editor screen by pressing the [ ] key. After inputting the name you desire to change press [ ] to save it. You can exit from the file menu screen by pressing the [ ] key or the [ ] key. FUN & TOOLS Animation This shows the list of animation files downloaded (applies to animation with wbmp format. You can see animation gif files at the Image menu.).
FUN & TOOLS FUN & TOOLS Melody Voice record This shows the list of melody files downloaded. You can see the size of selected melody files at the bottom. You can select desired melody files by using the [ ] key. Press the [ ] key to carry out the work regarding animation files. When the file menu screen appears, select desired menu by using the [ ] key and press the [ ] key You can record your voice by using this function.
FUN & TOOLS Press the [RECORD] key to record your voice, and save the recording by pressing the [SAVE] key. During recording, you can stop the recording by pressing [STOP] key and save the recording by pressing the [SAVE] key. Then a text editor window in which you can input the title of the recording will appear. The inputted title is displayed in the Voice memo list. Once creating the list of recording, select the applicable list which you desire to replay by pressing the [ ] key.
FUN & TOOLS FUN&TOOLS Bookmarks You can store Internet addresses which have WAP browsers. 1 Press [ ] Push messages Your phone can receive °ÆPush message°Ø from your service provider. 1 Press [ ] Settings You can set functions such as connection setting, security certificate, Cache mode, and Push security. 1 Press [ ] Connection settings 132 A. Home pages: This is the address of homepages. B. Image settings: You can select image display options. C.
FUN&TOOLS D.Gateway settings : This is the ID and password of the gateway. E. Bearer: You can select bearer type (Data/GPRS). F. Data Option IP address: Gateway IP addresss Dial : Dial number Data Call type: ISDN/ analogue Data Call speed: 2400/4800/9600/14400 bps User’s ID Password Timeout : 30/60/90/120 msec G.
FUN & TOOLS FUN & TOOLS JAVA Viewing Java Application list 1. Menu -> [7] Fun & Tools -> [5] Java 2.You can view the java application list stored inside your cell phone by pressing the [1] MIDIet list. Rabbit escape How to play Each stage is cleared if a rabbit collects all the keys by escaping a fox or letting enemies disabled to move via shooting its own excrement. Mini-map on screen displays the location of the player, enemies, preys, and keys.
FUN & TOOLS Deleting java application 1. Menu -> [7] Fun & Tools -> press [5] => same as above 2. [1] Press the MIDlet list key to view the list of saved applications. 3. Use the navigation key to select the application to delete. 4. Select [ ]. You will see a popup menu same as the following. Run: Runs selected application. Info: Deletes selected application from memory. Delete: Shows information of the selected application. =>If you press Delete, a confirmation screen will appear. Select Yes to delete.
FUN&TOOLS Camera You can take and save photos any time anywhere by using the camera function. The saved photos can be checked by using the Album menu. A change of name is also available. Snapshot You can take photos by selecting this menu. You can carry out the function by pressing “1” in the Camera menu or selecting “Snapshot”.
FUN&TOOLS Album You can manage photos taken by selecting this menu. You can run this function by either pressing “3” in Camera menu or selecting “Album”. A. Album consists of list mode and zoom mode. You can change mode by pressing the “ ” key. B. You can select photos by using the “navigation” key. C. You can carry out the following functions for the selected photos by using “menu” . i) Set as wallpaper: this sets the selected photos as the background screen for main LCD or sub LCD when you are idle.
FUN&TOOLS STK Memory info This displays the consumption and capacity of memory. In order to select memory info press [MENU] - [4] - [6] keys in order and press [OK] key. 144 STK is a service provided by service dealers while using the GSM net. For more information, please contact the service dealers you are registered to.
PHONEBOOK PHONEBOOK The Phonebook menu allows you to save a list of your private phone numbers. You may add or delete phone numbers. In addition, you may select to save date either in the SIM card or the phone memory. A maximum of 1,000 telephone numbers can be saved. Press [down] from the IDLE screen to enter the Phonebook. Name Search Select the [Name Search] and enter the name to search in the edit bar. The cursor will then move to the name list most similar to the entered name.
PHONEBOOK Menus appearing in Phonebook when pressing Menu key- in case you do not select icons -Search (search a number in the list) -Edit -Delete (delete all numbers of the person) Menus appearing in Phonebook when pressing Menu key after selecting icons -Delete (delete the number) -Add to Speed (store the number to the Speed Dial) -Send Message (Menu to send SMS / EMS) If you press the OK key, you can see saved contents in one screen. If wanting to edit, select Edit by using the Menu key.
PHONEBOOK Settings Save nos.to (Select saving place) PHONEBOOK Group ring tones You can assign different melodies by group. The phone numbers are stored in the place set in this menu. You can select SIM card/Phone memory/Choice. The ‘Choice’ lets you choose either SIM card or Phone memory every time you add a new number. Used space This shows you the storage capacity of the phonebook currently being used. You can save up to 500 800 telephone numbers in the phonebook.
MY MENU MY MENU You can collect and edit your favorite menus. Register desired menus by pressing [Menu] key Delete registered menus Register My Men 1) Go to desired menu. 2) Press the [ ] key. 3) When the ‘Add to My menu?’ window pops up, register it by pressing the [ ] key. 4) When not wanting to register cancel by pressing the [ ] or [ ] key. Use registered menu 1) Press the [ ] key from the idle screen. 2) Select the desired menu among the registered menus.
FOR YOUR SAFETY AND PROPER MAINTENANCE Appendix The following list shows how to maintain your mobile phone as well as precautions. - Keep your cell phone and its accessories out of the reach of children. - Keep your mobile phone in dry condition and use it in normal temperature.
TROUBLESHOOTING If you experience problems while using your mobile phone, please refer to the following checklist. If the problem persists, contact your dealer or nearest service center. TROUBLESHOOTING When call quality is poor: End the phone call and try again. When the message appears: Make sure the SIM card is correctly installed. Check to see if the SIM card is working properly. If it does not work, try cleaning the contact point of the card.
TROUBLESHOOTING When you are unable to charge the battery: This may be the result of one of the following three cases. 1. Your charger may be out of order. Contact your nearest dealer. 2. You may be attempting to use the phone in overly hot/cold temperature. Try changing the charging environment. 3. Your battery may have not been connected to the charger properly. Check the connector. When you are unable to input data into the Phonebook: Your Phonebook memory may be full.
SAFETY INFORMATION Road Safety Remember that safety always comes first when you drive. Do not use your mobile phone while driving a vehicle. If unavoidable to use the phone, park the vehicle before making a call. Always secure the phone in its holder. Do not place the phone where it may break loose in case of collision or sudden stop. OPERATING ENVIRONMENT Abide by local regulations and turn off your phone where usage is forbidden.
EMERGENCY CALLS Important! Since this mobile phone, like any other wireless phones, operates by utilizing radio signals, wireless/wired networks and user defined functions, we cannot guarantee successful call connection in all conditions. Therefore, you should never rely solely upon a mobile phone in emergency situations (e.g. medical emergencies). In order to make communication by phone possible, you must turn on your phone and be within an appropriate signal range.
