User Manual

- Lock : When the handset is power- up, PIN1 password is required

to access the main menu.

- Unlock : When the handset is power- up, no PIN1 is required and

you can see the main menu.

- C hange PIN : This menu is visible when “ SIM lock setting” is set to

“ Lock” . The user can change PIN1 immediately.

(2) Handset lock

Your handset can be locked to prevent c alls being made unless the

correct handset lock code is entered when it is switched on. The

handset will remain locked even if the SIM card is removed and

replaced with another one. You can still make emergency calls while

the handset is locked.

This function has following sub- options to selec t.

- Unlock

- C all only

- Loc k

- C hange code

(3) H/S barring

You can control types of calls your handset makes and receives in a

number of ways. Some of the bars are set using the handset.

The handset itself can be set to bar certain types of calls. These

are:

[ 1] Incoming call

You can set this function Lock/Unlock using selecting Lock/Unloc k

in the menu. Then your phone can bar all incoming calls.

[ 2] Outgoing call

You can set this function on by the case. You can bar outgoing call

that match a certain number prefixes spec ified by the user. As you