User Manual

42
1.4 Backlight
You can set the Light Level of Main Sub LCD.
Use Navigation [ UP/DOWN] Keys to move up and down to the mode you want to change and
then use Navigation [ RIGHT/LEFT] keys to c hange the value.
1. Light level(off, low, medium, high, maximum)
A. You can set the brightness of LED Bac k light while it is on.
2. Minimal bright(off, low, medium, high, maximum)
A. You can set the brightness of the LED Back light while it is off after the Light
Duration is expired.(This value cannot be higher than the value of Light Level).
3. Light duration
A. The time until light goes off automatic ally for no input from you after Back light
was turned on. (always off, 5 sec, 10 sec 20 sec, always on)
2. Date & Time
2.1 Set time
Press OK key after you input the time you want.