User Guide

21
Using a Wi-Fi network
The Element can use the Wi-Fi network to access to the Internet or run
applications that need Internet connection.
Connecting to a Wi-Fi network
1. Tap > Settings > Wi-Fi.
2. Tap OFF next to Wi-Fi to activate.
3. Select and tap a network. You should enter the password if the
network is secured. indicates a secured Wi-Fi network.
4. Tap Connect. Once the network is remembered, the Element will
automatically connect to it when in range.
Disconnecting to a Wi-Fi network
1. Tap > Settings > Wi-Fi.
2. Tap the Wi-Fi network that is connected to the Element.
3. Tap Forget to disconnect with the network.
Note You can also disconnect the Wi-Fi network easily in the home screen. Tap
the status bar on the bottom of the screen and adjust the settings.
Setting Wi-Fi networks
1. Tap > Settings > Wi-Fi.
2. Tap OFF next to Wi-Fi to activate.
3. Tap > Advanced.
4. Adjust the following options:
x Tap Network notification if you want to be informed when a Wi-Fi
network is available. It is selected by default. The icon in the
status bar indicates a network is available.
x Tap Keep Wi-Fi on during sleep and tap the policy about the time
to connect to the Wi-Fi network.
x Tap Wi-Fi Signal Filter and select the filter option for Wi-Fi
network.
Setting WPS connection
1. Tap > Settings > Wi-Fi.
2. Tap > WPS connection.
3. Adjust the following options:
x Tap Button connection. Ensure that you press the WPS button on
your Wi-Fi access point within two minutes.
x Tap Pin connection. Ensure that you enter the PIN at your Wi-Fi
access point within two minutes.
Searching for Wi-Fi networks
1. Tap > Settings > Wi-Fi.
2. Tap OFF next to Wi-Fi to activate. The Element scans networks
automatically every six seconds. The newly found networks appear
on the bottom of the list. If you want to find Wi-Fi networks manually
available around you, tap ADD NETWORK or tap SCAN.
Adding a Wi-Fi network
1. Tap > Settings > Wi-Fi.
2. Tap OFF next to Wi-Fi to activate.
3. Tap ADD NETWORK on the top right side of the screen.
4. Enter Network SSID, and select the security type among None, WEP,
WPA/WPA2 PSK and 802.1x EAP. Aside from Open, you must enter a
password for the network.
5. Tap Save.
Connectivity