User Guide

20
Using a Wi-Fi network
The Element can use the Wi-Fi network to access to the Internet or run
applications that need Internet connection.
Connecting to a Wi-Fi network
1. Tap Apps > Settings.
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap Wi-Fi to activate the technology.
4. Select and tap a network. You should enter the password if the
network is secured.
indicates a secured Wi-Fi network.
5. Tap Connect. Once the network is remembered, the Element will
automatically connect to it when in range.
Disconnecting to a Wi-Fi network
1. Tap Apps > Settings.
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap the Wi-Fi network that is connected to the Element.
4. Tap Forget to disconnect with the network.
Note You can also disconnect the Wi-Fi network easily in the home screen. Tap
the status bar on the bottom of the screen and adjust the settings.
Setting Wi-Fi networks
1. Tap Apps > Settings.
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap Wi-Fi to activate the technology.
4. Adjust the following options:
x Tap Network notification if you want to be informed when a Wi-Fi
network is available. It is selected by default.
x Tap WPS button connection if you want to establish a new
wireless connection using the Wi-Fi Protected Setup (WPS).
Ensure that you press the WPS button on your Wi-Fi access point
within two minutes.
x Tap Wi-Fi disconnect policy and tap the policy about the time to
connect to the Wi-Fi network.
x Tap Wi-Fi Signal Filter and select the filter option for Wi-Fi
network.
Searching for Wi-Fi networks
1. Tap Apps > Settings.
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap Wi-Fi to activate the technology. The Element scans networks
automatically every six seconds. The newly found networks appear
on the bottom of the list. If you want to find Wi-Fi networks manually
available around you, tap ! and tap Scan.
About network notifications
You are informed by default when a Wi-Fi network is available around you.
The icon
in the status bar indicates a network is available.
Adding a Wi-Fi network
1. Tap Apps > Settings.
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap Wi-Fi to activate the technology.
4. Tap Add Wi-Fi network on the bottom of the screen.
5. Enter Network SSID, and select the security type among Open, WEP,
WPA/WPA2 PSK and 802.1x EAP. Aside from Open, you must enter a
password for the network.
6. Tap Save.
Connectivity