User Guide

92
Settings
Viewing the status of space
1. Press n, tap Settings > Storage. The status of space
available for Crossover is displayed.
2
. Tap Unmount SD card > OK if you want to remove the SD
card from Crossover safely. Tap Mount SD card if you want
to mount the card.
Language & keyboard
Selecting the language
1. Press n, tap Settings > Language & keyboard > Select
language.
2
. Select and tap a language to use for Crossover.
Setting Swype
1. Press n, tap Settings > Language & keyboard > Swype.
2. Tap Preferences and adjust settings as you prefer.
x Tap Auto-spacing if you want space to be entered
between words automatically.
x Tap Show complete trace if you want to see the path of
every word.
x Tap Word suggestion if you want to see predicted
words as you type.
x Tap Speed vs. accuracy, drag the bar to the left or right
if you want to adjust the response speed and tap OK.
Setting the Android keyboard
1. Press n, tap Settings > Language & keyboard > Android
keyboard.
2
. Tap Vibrate on keypress if you want Crossover to vibrate
when you press soft keys.
3
. Tap Voice input if you want to change the method for voice
input. Tap On main keyboard, On symbols keyboard or Off
and tap OK.
4
. Tap Input languages, select and tap the language for the
keyboard and press l.
Setting the Android keyboard word suggestion
1. Press n, tap Settings > Language & keyboard > Android
keyboard.
2
. Tap Quick fixes if you want to correct commonly typed
mistakes. The check box is selected by default.
3
. Tap Show suggestions if you want to see suggestions while
you type. The check box is selected by default.
Setting the device keyboard
1. Press n, tap Settings > Language & keyboard > Built-in
keyboard.
2
. Tap Auto-replace if you want to correct mistyped words.
The check box is selected by default.
3
. Tap Auto-cap if you want to capitalize the first letter in a
sentence. The check box is selected by default.
4
. Tap Auto-punctuate if you want to enter “. ” automatically
by pressing space key twice. The check box is selected by
default.