User Guide

66
67
02
03
04
05
06
07
01
2. Say “ Help ”.
3. The Help guide will be displayed on your phone.
VOICE COMMANDS SETTINGS
CONFIRM CHOICES
When the phone does not recognize your voice command, it will ask you to repeat
your voice command. If it does not recognize the name or number, it will display a
list of up to three choices and speak each one in turn. You can control how often the
phone asks you to conrm the recognized name or number.
1. From the home screen, press the [ MENU ], then press 9. Settings &
Tools
, 3. Tools , 1. Voice Commands .
To view information about each option, press the Left Soft Key [Info].
2. Press the Right Soft Key [ Settings ] and then select 1. Conrm
Choices
.
Shortcut: From the home screen, press and hold the AVC(Advanced Voice Commands)
Key
to access the Voice Commands menu and press the Right Soft Key
[Settings].
3. Select Automatic , Always Conrm or Never Conrm , then press the OK
Key [
SET ].
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages “
Please try again ” or “ COMMAND
NOT RECOGNIZED Try again?
”, adjust the sensitivity toward Less Sensitive . If you
frequently experience false activations (when the phone recognizes a name you
didn’t say), adjust the sensitivity toward
More Sensitive .
1. From the home screen, press the [ MENU ], then select 9. Settings &
Tools
, 3. Tools , 1. Voice Commands .
2. Press the Right Soft Key [ Settings ] and then select 2. Sensitivity .
3. Select More Sensitive , Automatic or Less Sensitive , then press the OK
Key [
SET ].
ADAPT VOICE
Voice Commands are speaker independent, which means that no training
or adaptation is required. Some users with heavy accents or unusual voice
characteristics may nd diculty in achieving high accuracy with speaker
independent Voice Commands, so the Adapt Voice feature allows users to
dramatically improve the recognition accuracy after adapting their voices. Users who
get acceptable recognition accuracy will nd no additional benet to performing the
Adapt Voice feature.
1. From the home screen, press the [ MENU ], then select 9. Settings &
Tools
, 3. Tools , 1. Voice Commands .
2. Press the Right Soft Key [ Settings ] and then select 3. Adapt Voice .
3. Select
1. Train Voice , then press the OK Key.
• Train Voice: Requires that you make recordings of your voice to customize the voice
recognition system. It will take a few minutes.
4. “ Adaptation will take a couple of minutes to complete. Adapt in a
quiet room. Press OK to begin.
” will appear on the screen. Press the OK
Key. Wait for the beep, and then repeat the sentences using a normal tone
of voice.
5. When you are nished with a full session, you will reach a screen that reads
“
Adaptation Complete ”.
PROMPTS
Allows you to select voice command system characteristics.
1. From the home screen, press the [ MENU ], then select 9. Settings &
Tools
, 3. Tools , 1. Voice Commands .
2. Press the Right Soft Key
[ Settings ] and then select 4. Prompts .
3. Select
1. Mode , 2. Audio Playback or 3. Timeout , then press the OK Key.