Manual

describes various security codes used on your phone.

PIN1 code (4 to 8 digits)

The PIN1 (Personal Identification Number) code protects

your SIM card against unauthorized use. The PIN1 code is

usually supplied with the SIM card. If you input the incorrect

PIN1 code entry three times in a row, the PIN1 code will be

blocked. If the PIN1 code is blocked, you need the PUK 1

code to unblock before you can use the SIM card again.

See information on the PUK1 code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required

to access some functions, such as call cost counters.

Contact your carrier for information.

Lock code

The lock code can be used to lock the phone and keypad to

avoid unauthorized use.

PUK1 and PUK2 codes (8 digits)

The PUK1 (Personal Unblocking Key) code is required to

unblock a blocked PIN1 code. The PUK2 code is required

to unblock a blocked PIN2 code. If the codes are not

supplied with the SIM card, contact the operator whose SIM

card is in your phone for the codes.

Avoid using access codes similar to emergency numbers

such as 112, to prevent accidental dialing of an emergency

number.

Network Barring Password (4 digits)

The N/W password is required when you use the N/W

Barring function. Your service provider will provide the N/W

password to you when you subscribe to this function.

You can change this password using the Call barring

function.

(For further details, see Security on page 80.)

Access codes

NOTE

You can change the following codes: lock code, PIN1

code, and PIN2 code. These codes can include numbers from 0 to

9 only. The [

#] key works as the [o] function.

NOTE

The factory setting for the lock code is 1234. To avoid

unauthorized use of your phone, change the lock code. Keep the

new code secret and in a safe place separate from your phone.

060921_C3_EN-ºˆ¡§.indd 86 2006.9.21 1:59:1 PM