Instruction Manual

160160
Alert message
If you experience any problem while using your
mobile phone, please refer to the following
checklist. If the problem still persists, contact
your dealer or nearest carrier.
When the “Insert SIM Card” message
appears:
Make sure the SIM card is correctly installed.
Check to see if the SIM card is working properly.
If it does not work, try to clean the contact
points of the card with a dry cloth. If it is out of
order, take it to your service provider.
When the “Messages full” message appears:
The received or saved messages are full in
your phone memory. You need to delete the
message.
When the “Phone and SIM messages is full.
Delete Messages” message appears:
The received or saved messages are full in your
phone and SIM card memory. You need to
delete the message.
When the “Password” message appears in
Phone locked state:
Enter the phone password. The default
password is”1234”. If you cannot remember the
password, contact the nearest carrier.
When the “Enter PIN1” message appears:
Input PIN1. If you cannot remember it, contact
your service provider. You can still receive calls
even if your mobile phone becomes locked
after entering the incorrect PIN1 on three
consecutive attempts.