User Guide

46
CALLS AND MESSAGES
ADDING NEW INFORMAITON TO EXISTING CONTACT
1 Touch Phone from the Home screen.
2 Enter a telephone number and touch Save in the middle of the screen.
3 Touch Select a contact, and select and touch a contact to add information.
4 Touch the number or Add more field:
x Touch the number that appears on the top of the list if you want to replace the number with
one that you have entered.
x Touch Add more field if you want to add the number that you have entered, in an additional
field.
5 Touch Save when you finish editing contact.
TALKING THROUGH THE SPEAKER
1 Touch Speaker during a call. A red bar appears under Speaker when the function is on. The speaker
does not work when a headset it connected to the Breakout™.
2 Touch Speaker if you want to stop using the function.
Note If the proximity sensor is working, speakerphone would run automatically when you take your face off the
Breakout™ for a few seconds.
TALKING WITH Bluetooth TECHNOLOGY
1 Touch Bluetooth during a call. A red bar appears under Bluetooth when the function is on.
2 Touch Bluetooth if you want to stop using the function.
Note Refer to the relevant manual of the Bluetooth headset for more information.