User Manual

Network Camera User Manual
4
Chapter 2 Network Connection
2.1 Setting the Network Camera over the LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the network
camera in the same subnet with your computer, and install the AjDevTools or SADP
software to search and change the IP of the network camera.
AjDevTools：Download SADP：Download
2.2 Wiring over the LAN
The following figures show the two ways of cable connection of a network camera
and a computer:
Purpose:
 ① To test the network camera, you can directly connect the network camera to
the computer with a network cable.（Connecting directly must supply the camera
with DC 12V power supply）
Connecting Directly