User Manual
Table Of Contents
Network Camera User Manual
15
4.9 Modify the camera “Time & Date”
Steps: Configuration > System > Time setup.
There are two time update modes available:Manual and NTP.
Select your Time Zone, and click PC Sync,click Save, You can also set up the
DST (Daylight Savings Time) if necessary. (Time and date will reset to 2018-01-01 if
camera was restarted)
If the camera is connected to the Internet, you can set up a NTP server for the
camera to sync the time and date automatically.
4.10 Factory Reset
Steps: Configuration > System > Factory Reset.