Datasheet
PAGE . 1
November 3,2010-REV.01
DI200S~DI2010S
• Plastic material used carries Underwriters
Laboratory recognition 94V-O
• Low leakage
• Surge overload rating-- 50 amperes peak
• Ideal for printed circuit board
• Exceeds environmental standards of MIL-S-19500/228
• Lead free in comply with EU RoHS 2011/65/EU directives
MECHANICAL DATA
• Case: Reliable low cost construction utilizing molded plastic technique
results in inexpensive product
• Terminals: Lead solderable per MIL-STD-750, Method 2026
• Polarity: Polarity symbols molded or marking on body
• Mounting Position: Any
• Weight: 0.0115 ounce, 0.3268 gram
DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, Resistive or inductive load.
For capacitive load, derate current by 20%
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 X 0.5"(13 X 13mm) copper pads
FEATURES
VOLTAGE
50~1000 Volts
2.0 AmperesCURRENT
PARAMETER SYMBOL DI200S DI201S DI202S DI204S DI206S DI208S DI2010S UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS Bridge Input Voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 V
Maximum Average Forward Current T
A
=40
O
CI
F(AV)
2.0 A
Peak Forward Surge Current:8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
I
FSM
50 A
I
2
t Rating for fusing ( t<8.35ms) I
2
t10.0A
2
S
Maximum Forward Voltage Drop per Bridge Element at 2.0A V
F
1.1 V
Maximum DC Reverse CurrentT
J
=25
O
C
at Rated DC Blocking VoltageT
J
=125
O
C
I
R
5.0
500
μA
Typical Junction capacitance (Note 1) C
J
25 pF
Typical thermal resistance per leg ((Note 2) R
θ JA
R
θJL
40
15
O
C / W
Operating Junstion and Storage Temperature Range T
J
,T
sTG
-55 to + 150
O
C
0.335(8.51)
0.316(8.05)
0.406(10.3)
0.360(9.40)
0.255(6.5)
0.245(6.2)
0.045(1.14)
0.035(0.89)
0.098(2.5)
0.086(2.2)
0.310(7.9)
0.290(7.4)
0.011(0.28)
0.004(0.10)
0.009(0.25)
0.060(1.524)
0.040(1.016)
• Green molding compound as per IEC61249 Std. . (Halogen Free)