Datasheet

ManualsBrandsPANJIT ManualsDiodesZener diode Enclosure type (semiconductors) DO 214AA Zener voltage 47 V Max. power (P total) 2 W

PAGE . 1

1SMB2EZ6.8~1SMB2EZ51

FEATURES

• Glass passivated iunction

• Low inductance

• Typical I

less than 1.0µA above 11V

• Plastic package has Underwriters Laboratory Flammability

Classification 94V-O

• High temperature soldering : 260°C /10 seconds at terminals

• Lead free in compliance with EU RoHS 2011/65/EU directive

• Green molding compound as per IEC61249 Std. . (Halogen Free)

MECHANICAL DATA

• Case: JEDEC DO-214AA, Molded plastic over passivated junction

• Terminals: Solder plated, solderable per MIL-STD-750, Method 2026

• Polarity: Color band denotes cathode end

• Standard packing: 12mm tape (E1A-481)

• Weight: 0.0032 ounce, 0.092 gram

GLASS PASSIVATED JUNCTION SILICON ZENER DIODES

NOTES:

A.Mounted on 5mm

(0.013mm thick) land areas.

B.Measured on 8.3ms, and single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum

VOLTAGE

6.8 to 51 Volt

POWER

2 Watt

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

Parameter Symbol

Value Units

Peak Pulse Power Dissipation on T

=50

C (Notes A)

Derate above 50

2 W atts

Peak Forward Surge Current 8.3ms single half sine-wave

superimposed on rated load

FSM

15 Amps

Operating Junction and Storage Temperature Range

STG

-55 to + 150

0.083(2.11)

0.075(1.91)

0.185(4.70)

0.160(4.06)

0.096(2.44)

0.083(2.13)

0.050(1.27)

0.030(0.76)

0.220(5.59)

0.200(5.08)

0.012(0.305)

0.006(0.152)

0.155(3.94)

0.130(3.30)

December 8,2014-REV.05

Summary of content (7 pages)

PAGE 1
SMB2EZ6.8~1SMB2EZ51 GLASS PASSIVATED JUNCTION SILICON ZENER DIODES VOLTAGE 6.8 to 51 Volt POWER 2 Watt 0.155(3.94) 0.130(3.30) FEATURES • Glass passivated iunction • Typical ID less than 1.0µA above 11V • Plastic package has Underwriters Laboratory Flammability Classification 94V-O 0.083(2.11) 0.075(1.91) • Low inductance 0.185(4.70) 0.160(4.06) • High temperature soldering : 260°C /10 seconds at terminals 0.012(0.305) 0.006(0.152) • Green molding compound as per IEC61249 Std. .
PAGE 2
1SMB2EZ6.8~1SMB2EZ51 N o m i na l Ze ne r V o l t a g e Part Number V Z @ IZT No m. V Max. Reverse Leakage Current M a x i m u m Z e n e r Im p e d a n c e Z ZT @ IZT IZT Z ZK @ IZK IZK IR @VR M i n. V M a x. V Ω mA Ω mA μA V Marking C ode 2.0 watt Zener Diodes 1SMB2EZ6.8 6.8 6.46 7.14 2 73.5 700 1 5 4 2006 1SMB2EZ7.5 7.5 7.13 7.88 2 66.5 700 0.5 5 5 2007 1SMB2EZ8.2 8.2 7.79 8.61 2 61 700 0.5 5 6 2008 1SMB2EZ8.7 8.7 8.27 9.14 2 58 700 0.5 4 6.
PAGE 3
1SMB2EZ6.8~1SMB2EZ51 December 8,2014-REV.05 PAGE .
PAGE 4
1SMB2EZ6.8~1SMB2EZ51 RANGE 4 6 5 7 8 December 8,2014-REV.05 PAGE .
PAGE 5
1SMB2EZ6.8~1SMB2EZ51 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel December 8,2014-REV.05 PAGE .
PAGE 6
1SMB2EZ6.8~1SMB2EZ51 Part No_packing code_Version 1SMB2EZ6.8_R1_00001 1SMB2EZ6.8_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING December 8,2014-REV.
PAGE 7
1SMB2EZ6.8~1SMB2EZ51 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.