Instructions / Assembly

 

USING THE FRONT WHEELS FOR PRECISE POSITIONING
When the lift is leaned forward onto the front wheels it can be
moved side-to-side for the precise positioning before or after
lifting the panel.
REMOVING THE LIFT AFTER PANEL IS SECURED
Secure the panel to the wall. Turn the winch handle counter
clockwise to lower the cradle before moving the lift.
OPERATION CONTINUED
LIFTING AND HOLDING
With a firm grip on the horizontal handle, turn the winch
handle clockwise to raise the panel. The winch auto
locks and the panel will be held securely against the wall.
CAUTION: DO NOT RAISE THE PANEL OVER 24
INCHES UNLESS THE LIFT IS STANDING ON THE
FRONT WHEELS AND THE PANEL IS LEANING
AGAINST THE WALL.
9
TRANSPORTING THROUGH A DOORWAY OR HALLWAY
Load a panel as described on prior page. Turn the winch handle clockwise
to raise the panel 6 to 12 inches off the floor. With one hand on the vertical
handle and the other gripping the top edge of the panel, lean the lift and
panel forward onto the front wheels. Position the lift so the end of the panel
is pointing toward the doorway or hallway. Push the lift sideways on the
front wheels.