Installation Manual

For Technical Support: http://www.panduit.com/wcs/Satellite?pagename=PG_Wrapper&friendlyurl=/en/support/contact-us

INSTALLATION INSTRUCTIONS

V00028NW

Wall Mounting

Enclosure may be mounted on any wall utilizing Unistrut or by drilling directly into any concrete wall.

There are two mounting hole locations on the top flange and two locations at the bottom flange.

Step 1:

Drill holes 19.25"-22" apart horizontally and 26" apart vertically.

Step 2:

Mount the enlosure with the locks to the right and secure.

If mounting flanges are not used:

The holes in the wall will be 22.5" apart horizontally and 34.5" apart vertically.

Backview for wall mounting

Hole Locations for Wall Mounting

Page 7 of 12