Installation Manual

For Technical Support: http://www.panduit.com/wcs/Satellite?pagename=PG_Wrapper&friendlyurl=/en/support/contact-us
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00028NW
· Fiber-optic trunk cable: FSPD504 or similar
· LC Fiber-optic connectors: FLCDMCXAQY or similar
· Fiber-optic termination tools: OptiCam termination kit or similar
· Category 6 copper cable for downlinks: PUR6504BU-UY or similar
· Copper cable termination tools: wire cutters, EGJT tool
· Rigid conduit for power and copper downlink cables
· Tools to cut enclosure sidewalls: Greenlee punch or similar
· 5/16” bolts for wall mounting of steel enclosure
· #6 AWG Infrastructure ground cable: RGEJ660PF or similar
· 3/8" bolts for wall mounting of stainless steel enclosure
· 3/8" socket or box wrench ground bar
Tools and supplies needed to complete install of Preconfigured Zone System: (not included)
Page 4 of 12
Preconfigured Network Zone Z22C-** Specifications
Enclosure Rating
UL Type 4/12 and IP66 (IEC 60529), NEMA 4X available
Installation
Wall mount with optional outside-mount flange
Dimensions
Height Width Depth
24”
(610 mm)
24”
(610 mm)
11.7”
(297 mm)
Weight
75 lbs. (34.0 kg)