Installation Manual

For Technical Support: http://www.panduit.com/wcs/Satellite?pagename=PG_Wrapper&friendlyurl=/en/support/contact-us
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00028NW
Recommended Installation
Instructions for Power Entry
Remove plug in gland
plate and replace with
conduit fitting.
Recommend installation
of IP66 rated conduit fit-
tings that comply with
the IEC codes that are
applicable to the
intended application.
Power Conduit Entry
Cage Removal
Remove(3)
#10-32 screws
Uplink Cable
Conduit Entry
Uplink Cable (fiber
shown) spooled in the
surface mount box
Downlink Cable
Conduit Entry
Slack loop formed
around the L-ring
cable managers
Connect infrastruc-
tural ground to ground
Page 11 of 12
Recommended Installation
Instructions for Uplink Entry
Recommended Installation
Instructions for Downlink Entry