Technical Bulletin

VeriSafe
™
Absence of Voltage Tester
6
Dimensions*
Indicator Module
*Dimensions in inches [millimeters].
4.67
[119]
1.54
[39.1]
Ø 1.913
[48.6]
0.180
[4.6]
0.080
[2.0]
Ø 1.201
[30.5]
PANEL
KNOCKOUT
3.96
[100.6]
3.31
[84.1]
3.46
[87.9]
3.68
[93.5]
1.51
[38.4]
Isolation Module
Install on DIN rail or with
optional mounting tabs
1.57
[39.8]
1.29
[32.9]
Several connection options available. For full list of installation
methods, please refer to the VeriSafe
™
Insulation Piercing
Connector specification sheet and VeriSafe Connection
Options document located on Panduit.com
Connection Options
Warning: The AVT must be installed correctly and
grounded as described in the Instruction Manual
to provide proper indication of absence of voltage.
Sensor leads, including ground, must not be
mechanically connected to each other in order
for the device to verify connection to the circuit.
Use of ferrules on the AVT sensor leads are
highly recommended.
DIN rail
mounting clip
VeriSafe
™
Access Control Kit is a complete hardware kit for
customers looking to further their safety and security by adding
an electronic latch in their disconnects and equipment
• Restrict enclosure access until the absence of voltage
is confirmed
• Provides design labor and assembly savings
• Includes mechanical override
• Integrates with output contacts on AVT Isolation Module
Access Control Kit (optional)