Cut Sheet

VeriSafe
™
Absence of Voltage Tester
6
Dimensions* Schematics
Indicator Module
*Dimensions in inches [millimeters].
Three-Phase Delta: 3 Wire + PE
Three-Phase WYE: 3 Wire + Neutral and PE
DC System: 2 Wire +
3.96
[100.6]
3.31
[84.1]
3.46
[87.9]
3.68
[93.5]
1.51
[38.4]
4.67
[119]
1.54
[39.1]
Ø 1.913
[48.6]
Warning: The AVT must be installed correctly and grounded as described in the installation instructions to provide proper indication of absence
of voltage. Sensor leads, including ground, must not be mechanically connected to each other in order for the device to verify connection to
the circuit.
Isolation Module
0.180
[4.6]
0.080
[2.0]
Ø 1.201
[30.5]
PANEL
KNOCKOUT
1.57
[39.8]
1.29
[32.9]