Cut Sheet
P.19
www.panduit.com
For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see
catalog back cover).
A.
System
Overview
B.
Copper
Systems
C.
Fiber
Optic
Systems
D.
Power
over
Ethernet
E.
Zone
Cabling
F.
Wireless
G.
Outlets
H.
Media
Distribution
I.
Physical
Infrastructure
Management
J.
Overhead &
Underfloor
Routing
K.
Surface
Raceway
L.
Cabinets,
Racks &
Cable
Management
M.
Grounding &
Bonding
N.
Industrial
O.
Labeling &
Identification
P.
Cable
Management
Accessories
Q.
Index
PHYSICAL INFRASTRUCTURE SYSTEMS
HLTP/HLSP Hook and Loop Cable Ties – Plenum
• Soft, premium material is safe to use on high performance
network cables protecting against over-tensioning
• UL Listed for use in plenum or air handling spaces (such
as ceiling voids and underfloor areas) per NEC, Section
300-22 (C) and (D)
• Material flammability rating: UL 94V-2
• Adjustable, releasable, and re-usable multiple times –
ideal for applications requiring frequent moves, adds,
or changes
• Operating temperature range: 0°F – 122°F
(-18°C – 50°C)
Note: Minimum 2 inch overlap required to achieve loop
tensile rating
Tak-Tape
™
Hook & Loop Cable Tie Rolls
• Strong, low profile, flexible material is safe to use on high
performance cabling protecting against over-tensioning
• Adjustable, releasable, and re-usable
• Cost-effective for general purpose bundling
• Continuous rolls can be easily cut to size – Panduit cutter
included with TTS-35RX0
• Handy, re-usable plastic case with TTS-20R0, keeps
material clean
• Leaves no residue
• Available in black color
• Operating temperature range: -22°F – 194°F
(-30°C – 90°C)
• Complementary mounts available, see page P.35
Note: Minimum 2 inch overlap required to achieve loop
tensile rating
Std. Pkg. Qty. for TTS-35R3-0 is 1 pkg. of three 35' rolls, TTS-35RX0 is 1 pkg. of ten 35' rolls.
Part Number
Length Width
Max.
Bundle Dia.
Min. Loop
Tensile Str.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
In. mm In. mm In. mm Lbs. N
UL Listed Loop Ties (Maroon) – Slot allows for pre-wrapping of bundles
HLTP2I-X12 8.00 203.0 0.50 12.7 1.91 49.0 40 178 10 100
HLTP3I-X12 12.00 305.0 0.50 12.7 3.18 81.0 40 178 10 100
UL Listed Loop Ties (Black) – Slot allows for pre-wrapping of bundles
HLTP2I-X0
8.00 203.0 0.50 12.7 1.91 49.0 18 80 10 100
HLTP3I-X0 12.00 305.0 0.50 12.7 3.18 81.0 18 80 10 100
UL Listed Strip Ties (Maroon) – Perforated in convenient 6", 12", and 18" strips
HLSP1.5S-X12 6.00 152.0 0.75 19.1 1.50 38.0 50 222 10 100
HLSP3S-X12 12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100
HLSP5S-X12 18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100
UL Listed Strip Ties (Black) – Perforated in convenient 6", 12", and 18" strips
HLSP1.5S-X0
6.00 152.0 0.75 19.1 1.50 38.0 18 80 10 100
HLSP3S-X0 12.00 305.0 0.75 19.1 3.20 81.0 18 80 10 100
HLSP5S-X0 18.00 457.0 0.75 19.1 5.00 127.0 18 80 10 100
Part Number
Length Width
Max.
Bundle Dia.
Min. Loop
Tensile Str.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Ft. m In. mm In. mm Lbs. N
TTS-20R0
20 6.1 0.75 19.1 Various Various 40 178 1 10
TTS-35R3-0 35 10.7 0.75 19.1 Various Various 40 178 1 8
TTS-35RX0
35 10.7 0.75 19.1 Various Various 40 178 1 10