Specifications

37
visit www.panduit.com/Cabinets
Sealing Accessories
Part Number Description
Cool Boot
®
Cabinet Top Air Sealing Fitting
CTGN1X5
Used to seal off 1" x 5" cabinet top openings when cables are routed through the top of a cabinet. Airtight
fabric and Ultra-Cinch
™
Tie close top of fabric, minimizing hot air bypass around cables to improve cooling
of network equipment and reduce energy costs. For use with 600mm wide Net-Access
™
Cabinets.
CTGN3X5
Used to seal off 3" x 5" cabinet top openings when cables are routed through the top of a cabinet. Airtight
fabric and Ultra-Cinch
™
Tie close top of fabric, minimizing hot air bypass around cables to improve cooling
of network equipment and reduce energy costs. For use with 700mm, 800mm, and 1000mm wide
Net-Access
™
Cabinets.
CTGN6X6
Used to seal off 6.5" x 6.5" cabinet top openings when cables are routed through the top of a cabinet. Airtight
fabric and Ultra-Cinch
™
Tie close top of fabric, minimizing hot air bypass around cables to improve cooling of
network equipment and reduce energy costs. For use with 600mm, 700mm, 800mm, and 1000mm wide
Net-Access
™
Cabinets.
Cabinet Top Cover and Cable Protection Bezel
CTCN1X5
Used to seal off 1.5" x 5" cabinet top openings. Can also be used to add the CTGN1X5 to openings where the
snap-on cover has been removed. For use with Net-Access
™
Cabinets.
CTCN3X5
Used to seal off 3.5" x 5" cabinet top openings. Can also be used to add the CTGN3X5 to openings where the
snap-on cover has been removed. For use with Net-Access
™
Cabinets.
CTNBZL6X6
Used to provide a protective edge for cables routed through the 6.5" x 6.5" cabinet top openings after
knock-outs are removed. Can also be used to add the CTGN6X6 to openings where knock-out has been
removed. For use with Net-Access
™
Cabinets.
Blanking Foam Strips
BFS100X2000
Adhesive-backed blanking foam strips conform to minimize gaps and prevent bypass air within network
cabinets. Removable and repositionable acrylic-based adhesive is aggressive to provide suitable strength,
however, will not leave residue on equipment. 4.0" x 100" roll perforated 1.0" in width and 20.0" in length.
Cool Boot
®
Raised Floor Air Sealing Grommet
RFG12X4SMY
Overall size of 12" x 4" (304.8mm x 101.6mm) allows for 10.2" x 2.2" (259.1mm x 55.9mm) maximum capacity.
Surface mount product can be installed over any opening less than 10.2” x 2.2” (259.1mm x 55.9mm).
RFG12X4Y
Overall size of 12" x 4" (304.8mm x 101.6mm) allows for 10.2" x 2.2" (259.1mm x 55.9mm) capacity.
Includes fl exible sub-grommet to prevent damage to cable from sharp edges of cut fl oor tile.
CTGN1X5
CTGN3X5
CTCN1X5
CTCN3X5
BFS100X2000
CTGN6X6
CTNBZL6X6
RFG12X