Cut Sheet

www.panduit.com
applications
Pan-Way
®
Twin-70 Surface Raceways are
designed to provide easy and economical
solutions for routing power and low voltage
cable in independent channels along
perimeter walls, baseboards or ceilings.
This raceway is a perfect solution for schools,
hospitals, offices or anywhere high cable
capacity is required.
Pan-Way
®
Twin-70 Raceway
Raceway Bases
8 feet: T702BIW8
10 feet: T702BIW10
Raceway Covers
8 feet: T70CIW8
10 feet: T70CIW10
Divider Walls
8 feet: T70DW8
10 feet: T70DW10
Twin-70 Raceway Fittings
Base coupler: T702BCIW-X
Cover coupler: T70CCIW-X
Outside corner: T702OCIW
Inside corner: T702ICIW
Right angle: T702RAIW
End cap: T702ECIW
Entrance end: T702EEIW
Tee fitting: T702TIW
Transition to T-70: T702TRIW
Transition to
LD/T-45: T702TRLIW
Transition divider
insert: T702TRI
Twin-70 Accessories
Wire retainer: T70WR-X
Device bracket: T70DB-X
Standard faceplate
bracket: T70SDB-X
Three sided
hanging box: T70HB3-X
GFCI three sided
hanging box: T70HB3GFCI-X
Hanging box: T70HB-X
Spacer plate: T70S-X
Fiber spool
bracket: T70FSB
For standard colors other than IW (Off White),
replace IW in part number with EI (Electrical
Ivory) or WH (White).
Pan-Way
®
Twin-70 Surface Raceway System
key features and benefits
Separate covers
throughout the system
Maintains complete separation of power and data cabling
systems and provides maximum safety during installation for
moves, adds, and changes
1" bend radius
control fittings
Cables in the raceway will satisfy the minimum 1" bend radius
requirement, preventing the potential degradation of cable
performance
Snap-on faceplates
Faceplates snap directly onto the raceway base; cabling can be
quickly accessed by removing only the faceplate, requiring less
labor and lowers the cost of maintenance
Designer profile
Maintains the same aesthetically pleasing profile of Panduit T-45,
T-70, and TG-70 raceway which allows all four systems to work
together or independently
Non-metallic
Lightweight, reducing installer fatigue and labor required to install
the raceway. Easy to cut with standard saws and saw blades,
eliminating the need for special cutting devices
Available in different
lengths, and colors
Available lengths – 8', 10'
Available colors – IW, EI, WH
Raceway is field paintable to match walls and surrounding décor.
SPECIFICATION SHEET
specifications
Twin-70 non-metallic, multi-channel surface raceway is used to
route, protect, and conceal data, voice, fiber optic, and power
cabling. The raceway is listed as suitable for use in applications
up to 600 volts between connectors when screw secured and
installed per instructions. A full complement of fittings with a 1"
minimum bend radius is available as well as device brackets and
internal junction boxes to install a variety of communication and
electrical devices. The raceway provides two separate covers to
maintain total separation of power and low voltage cabling. The
Twin-70 raceway finish is pure in color and will resist scratches
and dents, and will not peel or corrode. Twin-70 raceway is
available in three standard colors and is optimized for use with
the Panduit
®
Pan-Net
®
Communication System.
technical information
Material:
Rigid PVC
Flammability:
UL94V-0; FT4
Voltage rating:
UL 600V / CSA 600V
Safety compliance:
UL Listed 95425 (raceway); UL Listed E116129 (fittings)
NEC:
Article 388
Capacity:
Multi-channel
Operating and
storage temperature:
0° to 50°C