manual

INSTRUCTIONS CM599D
For Technical Support: www.panduit.com/resources/install_maintain.asp
PDU Bracket Adjustment
• PDU brackets are height-adjustable if PDU spacing other than the factory position is desired.
• Remove [2] M5 Torx Screws per bracket, as shown below
• Reposition brackets at desired distance, ensuring that mounting flange of PDU bracket rests on the outside of cabinet post. (See
‘Installed’ view below)
• Secure each PDU bracket to cabinet post with [2] M5 Torx Screws per bracket
[2] M5 Torx Screws
(use T25 Torx bit)
PDU Bracket
(installed)
Top PDU Bracket
Bottom PDU Bracket
[2] M5 Torx Screws
(use T25 Torx bit)
Page 17 of 22