Installation Manual

INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
CM599L
© Panduit Corp. 2016
Page 9 of 27
IMPORTANT:
Ensure cabinets are level by following the guidelines on page 6. Leveling the cabinet prior to
ganging is important to ensure proper door operation.
Ganging (rear of cabinet)
• Ensure cabinets are level
• Secure Ganging Brackets to cabinets at [2] rear locations shown below
• Do not use Ganging Brackets to cinch cabinets together
• Holes for screws are not tapped. Apply force to drive screws.
REAR OF CABINETS
[2] Rear Ganging
Brackets
[4] M5 Torx Screws
(use T25 Torx bit)
CABINET TIPPING HAZARD
Ganging of cabinets only provides limited stability to the cabinets, and is not a substitute for proper leveling or floor mounting of cabinets.
Ensure that cabinets are properly mounted to floor before equipment is installed in cabinet. (See page 7)
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN LEAD TO SERIOUS INJURY, DEATH, OR DAMAGE TO YOUR EQUIPMENT.
WARNING