Installation Manual

INSTALLATION INSTRUCTIONS

For Technical Support: www.panduit.com/resources/install_maintain.asp

CM599L

Page 5 of 27

[2] M14 Hex Nuts

(use 22mm socket wrench)

Front Door

Shipping

Brackets

[8] M10 Hex Head Screws

(use 15mm socket wrench)

Pallet

[4] Shipping

Hold Down

Brackets

Note: Doors, side panels, and other components are removed for clarity

IMPORTANT:

Leveling Legs must be fully retracted before the cabinet is moved into place. Sliding cabinet on leveling legs may result in

damage to the leveling legs. (Leveling Legs ship in retracted position)

Packaging Material Removal

“Shipping Hold Down Bracket” Doubles as Floor Mounting Bracket. Retain bracket if floor mounting is desired. (see Page 7)

• Remove all stretchwrap and protective cardboard from outside of cabinet

• Remove all Shipping Brackets (if necessary)

• Remove [4] Hold Down Brackets at front and rear of cabinet

• Use

at least [2] persons to carefully lift and remove cabinet from pallet