Installation Manual

INSTALLATION INSTRUCTIONS

For Technical Support: www.panduit.com/resources/install_maintain.asp

CM599L

Page 21 of 27

PDU Bracket Adjustment

• PDU brackets are height-adjustable if PDU spacing other than the factory position is desired.

• Remove [2] M5 Torx Screws per bracket, as shown below

• Reposition brackets at desired distance, ensuring that mounting flange of PDU bracket rests on the outside of cabinet post.

(See ‘Installed’ view below)

• Secure each PDU bracket to cabinet post with [2] M5

[2] M5 Torx Screws

(use T25 Torx bit)

PDU Bracket

(installed)

Top PDU Bracket

Bottom PDU Bracket

[2] M5 Torx Screws

(use T25 Torx bit)