Installation Manual

INSTALLATION INSTRUCTIONS

For Technical Support: www.panduit.com/resources/install_maintain.asp

CM599L

Removable Insert

Overhead Cable

Opening Bezel

Page 13 of 27

Overhead Cable Openings

• Remove Bezel Insert to allow for overhead cable entry

• Cut [8] tabs with wire cutter to open large cable openings - OPTIONAL

• Install M10 threaded rod into [6] tapped holes for 1070mm deep cabinets or [9] tapped holes for 1200mm deep cabinets, if desired

• [2] 165.1mm x 165.1mm [6.5” x 6.5”] openings can be used to route power overhead

• PANDUIT

OOL

OOT

products can be used to seal around cables/fiber to prevent hot air recirculation

[6] M10 Threaded Holes

Bezel

OPTIONAL

use wire cutters to remove

sheet metal blanks.

[2] 165.1mm x 165.1mm Openings

[6.5” x 6.5”]