manual

INSTRUCTIONS CM408F
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 9 of 24
Cable Management Brackets and Fingers
For precise positioning adjustment of cable management brackets, loosen (2) #12-24 hex head screws at top of bracket and (2) #12-24 hex
head screws at bottom of bracket using 5/16” socket. Adjust bracket position and retighten (4) #12-24 hex head screws. For large adjust-
ments, remove (4) #12-24 screws securing bracket to cabinet frame, reposition bracket, and secure cable management bracket with (4)
#12-24 hex head screws as shown.
Cable management fingers may be placed where desired by inserting the tabs on the rear of the finger sections into the mounting slots
located on the cable management brackets and then sliding downward. Reverse the process to remove cable management fingers.
Loosen (2) #12-24 Hex
Head Screws for precise
bracket adjustment
(use 5/16” socket)
Loosen (2) #12-24 Hex
Head Screws for precise
bracket adjustment
(use 5/16” socket)
Remove (4) #12-24 Hex Head Screws
(2-top, 2 bottom) for large cable
management bracket adjustments
(use 5/16” socket)
Cable Management
Finger Bracket
Cable Management
Finger