manual

INSTRUCTIONS CM408F

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 22 of 24

Cabinet Sealing

Raise cabinet frame at least 1” above floor using leveling legs (see page 4). Install Front and Rear Floor Seal Brackets with foam seals to

cabinet with (2) #10-32 x 1/2” Phillips trilobular screws and paint piercing washers per bracket. Foam seals are to sit under the cabinet

frame when installed. Lower and level the cabinet frame to between 1/2” and 1” above floor to maintain a firm seal between cabinet frame

and floor.

NOTE: SFS-KIT is required for end of row floor sealing.

[2] #10-32 x 1/2” Phillips

Trilobular Screws and

Paint Piercing Washers

Floor Seal Bracket

[2] #10-32 x 1/2” Phillips

Trilobular Screws and

Paint Piercing Washers