Cut Sheet

M.19
www.panduit.com
For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see
catalog back cover).
A.
System
Overview
B.
Copper
Systems
C.
Fiber
Optic
Systems
D.
Power
over
Ethernet
E.
Zone
Cabling
F.
Wireless
G.
Outlets
H.
Media
Distribution
I.
Physical
Infrastructure
Management
J.
Overhead &
Underfloor
Routing
K.
Surface
Raceway
L.
Cabinets,
Racks &
Cable
Management
M.
Grounding &
Bonding
N.
Industrial
O.
Labeling &
Identification
P.
Cable
Management
Accessories
Q.
Index
PHYSICAL INFRASTRUCTURE SYSTEMS
Equipment Jumper Kits
• Bond network equipment to grounding strip or
grounding busbar
• Jumper kit available with both ends factory terminated to
provide a bolt-on solution
• Jumper kit available with one end factory terminated to
attach to the grounding strip or grounding busbar; free
end accommodates unique equipment terminations
• Use jumpers with 90° bent lug, on grounding strip side,
for high density grounding requirements up to one ground
point per RU
• Use jumpers with 45° bent lugs, on grounding strip side,
for improved cable management
• Engineered to comply with US and International
grounding requirements
RGEJ1024PFY
RGEJ1057PFY
An equal number of M6 x 12mm thread-forming screws also provided in each kit.
*For use with VBlock preconfigured solutions.
Part Number
Length
In.
(m)
Angle Part Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
#6 AWG (16mm²) Equipment Jumper Factory Terminated on One End for Switches,
Cabinets, and 4-Post Racks
GJS660U 60
(1.52)
Straight #6 AWG green wire with yellow horizontal stripe.
Jumper is pre-terminated on one end with
LCC6-14JAW-L.
1 10
GJS696U 96
(2.44)
Straight 1 10
#10 AWG (6mm²) Equipment Jumpers Factory Terminated on Both Ends
RGEJ1024PHY 24
(0.61)
45° #10 AWG (6mm²) jumper; bent lug on grounding
strip side to straight lug on equipment; provided
with .16 oz. (5cc) of antioxidant and two each
#12-24 x 1/2", M6 x 12mm, #10-32 x 1/2" and
M5 x 12mm thread-forming screws.
1 10
RGEJ1024PFY 24
(0.61)
90° 1 10
RGEJ1036PFY 36
(0.91)
90° 1 10
RGEJ1024URT* 24
(0.61)
Straight #10 AWG (6mm²) jumper, 24 in. (609.6mm) L,
pre-terminated with two #10 (5.3mm) stud hole
ring terminals to provide a bolt-on solution for
grounding network equipment.
1 10
#6 AWG (16mm²) Equipment Jumpers Factory Terminated on Both Ends
RGEJ624PHY 24
(0.61)
45° #6 AWG (16mm²) jumper; bent lug on grounding
strip side to straight lug on equipment; provided
with .16 oz. (5cc) of antioxidant and two each
#12-24 x 1/2", M6 x 12mm, #10-32 x 1/2" and
M5 x 12mm thread-forming screws.
1 10
RGEJ624PFY 24
(0.61)
90° 1 10
RGEJ636PFY 36
(0.91)
90° 1 10
RGEJ660U* 60
(1.52)
Straight #6 AWG (16mm²) jumper, 60 in. (1524mm) L,
pre-terminated with two straight slotted lugs
to provide a bolt-on solution for grounding
network equipment.
1 10
RGEJ696U* 96
(2.44)
Straight #6 AWG (16mm²) jumper, 96 in. (2438.4mm) L,
pre-terminated with two straight slotted lugs
to provide a bolt-on solution for grounding
network equipment.
1 10
#10 AWG (6mm²) Equipment Jumper Factory Terminated on One End
RGEJ1057PFY 57
(1.45)
90° #10 AWG (6mm²) jumper; bent lug on grounding
strip side; provided with .16 oz. (5cc) of
antioxidant and two each #12-24 x 1/2",
M6 x 12mm, #10-32 x 1/2" and M5 x 12mm
thread-forming screws.
1 10
#6 AWG (16mm²) Equipment Jumper Factory Terminated on One End
RGEJ657PFY 57
(1.45)
90° #6 AWG (16mm²) jumper; bent lug on grounding
strip side; provided with .16 oz. (5cc) of
antioxidant and two each #12-24 x 1/2",
M6 x 12mm, #10-32 x 1/2" and M5 x 12mm
thread-forming screws.
1 10