Technical Bulletin

18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMH6
24APR14
6
Technical Data Sheet
Page 1 of 2  2009 PANDUIT Corp
TDS: GMH6
Turn Tell Label
This specification is intended to outline the physical and chemical properties of PANDUIT’s pressure sensitive self-laminating clear
polymer label that can be rotated and repositioned after installation and include the following part numbers and printable material
identifiers:
Part Number Prefixes Printable Material Suffixes
V*T V*C
PRODUCT SPECIFICATIONS:
Description:
Material is RoHS compliant (European Union directive 2002/95/EC).
Material is a top coated polymer film with a pressure sensitive adhesive
and is used in a self-laminating format for wire/cable marking.
Print Methods: This material is recommended for thermal transfer printing.
Adhesive: Acrylic based, pressure sensitive adhesive.
Standard Colors: Clear film with colored print-on area
Thickness: V*C - 4.5 +/- 0.5 mils (substrate and adhesive)
V*T 5.50+/- 0.5 mils (substrate and adhesive)
Service Temperature Range: -40°F to 150°F (-40°C to 65.6°C)
Minimum Application Temperature: 50°F (10°C)
Storage Conditions: Store at 70°F (21°C) and 50% Relative Humidity.
P1 cassettes should not be stored in direct sunlight, or temperatures exceeding
95°F.
PROPERTIES: PERFORMANCE:
Peel Adhesion to Stainless Steel:
32 oz/in width minimum (PSTC-101, 15 min. dwell)
Shear Adhesion: 3 hours minimum (PSTC-107, Procedure A)
Tensile Strength: MD 55 +/- 5.5 lbs./inch width (PSTC-131)
Elongation:
MD 110% +/- 10% (PSTC-131)
UV Resistance: *3000 hours no change observed (ASTM G154)
Elevated Temperature Exposure: After 8 hours at 150°F (65.5°C) there was no deterioration of the substrate
*3000 hours equates to 5 years of assimilated outdoor UV exposure.