manual

QuickNet Application Guide
7
Switch Port Equipment Harnesses (cont.)
QuickNet
™
48-Port
High Density
Vertical Numbering
Patch Panels
Part numbers:
QPP48HDVNSBL
QAPP48HDVNSBL
Note: Plug ends can be
staggered in length for easier
management at switch ports
(see p. 9 under “Trunk Type &
Terminations”).
QuickNet
™
Cassette-to-Plug
Cable Assembly
Mini-Com
®
Modular
48-Port Vertical
Numbering Patch Panels
Part numbers:
CPP48HDVNSWBL
CPPA48HDVNSWBL
QuickNet
™
Jack-to-Plug Pack
Cable Assembly
Best QuickNet choices (for replicating switch port layout at panel): Either a Cassette-to-Plug cable assembly mated
to a QuickNet
™
Patch Panel or a Jack-to-Plug Pack cable assembly mated to a Mini-Com
®
Modular Patch Panel.
Note: In both cases, the vertically numbered panels below must be used to correctly replicate the switch port numbering.
Example of panel to switch
port mapping when using
QuickNet
™
Cassette-to-Plug
Cable Assembly
Example of panel to switch
port mapping when using
QuickNet
™
Jack-to-Plug Pack
Cable Assembly
Switch / Network
Cabinet
Switch / Network
Cabinet
Figure 4b - QuickNet
™
Cassette-to-Plug Cable Assembly
Figure 4c - QuickNet
™
Jack-to-Plug Pack Cable Assembly