Specifications

Networked and Environmental Monitored POU
34
Version 1.0
 Note: The sensors use a serial communication protocol and are subject to network signaling
constraints dependent on shielding, environmental noise, and length of wire. Typical installations
allow runs of up to 600 feet of sensor wire.
Data Logging and Display
All data collected by the unit can be graphed, except kilowatt-hours. The Logging page allows the user to
select graphed content to be logged. Selected sensor values are logged into the data file at a rate of one
point per minute and will be displayed on the optional Remote Display. The number of selected sensors
determines the maximum data logging time span. This period is calculated and displayed on the Logging
page. The oldest data will be deleted when the onboard memory fills up in order to make room for new
data.