Specifications

Networked and Environmental Monitored POU

Version 1.0

Telnet

The unit provides a Telnet server for basic monitoring via the command line. The Administrator account

must be enabled to use the Telnet interface. Type “help” after logging in to the unit to see a list of

available commands. The Telnet service can be disabled under “Web Server” on the Network tab of the

Configuration page.

 Note: All data sent via Telnet is unencrypted. Some settings can be changed and user names and

network settings are available via Telnet. In secure environments, it is recommended that Telnet be

disabled.

Camera Configuration

Enter the domain names/IP addresses and models of up to four IP-addressable network cameras in the

“Cameras” section of the Monitoring tab on the Configuration page. The unit will present a linked

snapshot from each camera on the Sensors page.

Note: Each camera must be set to allow anonymous access to enable this feature.

Admin Information

Information entered in the “Admin Info” section of the Admin tab of the Configuration page will show up at

the bottom of the unit’s web interface.