Specifications

Networked and Environmental Monitored POU
26
Version 1.0
An SMTP server as well as “From” and “To” addresses are required to send e-mails. Some mail servers
may require a username and password. In most cases, the username does not have to match the “From”
address, but does need to be a valid user on the authenticating server. Microsoft Exchange servers will
have to be set to allow SMTP relay from the IP address of the unit. In addition, a test email can be sent
from the bottom of the Monitoring tab of the Configuration page.
Note: The unit cannot receive e-mails. The POP3 server is used strictly for authentication and is not
required when using None or ESMTP.
Status Reports
When enabled, the unit will periodically send a full status report to all “To” e-mail addresses selected for
the report. The report includes current unit data from all attached sensors as well as alarm states.
Reporting frequency options are: weekly, hourly, every 2, 3, 4, 6, 8, 12, 24, or 48 hours. E-mail
addresses are selected when the report is created by checking the corresponding e-mail destination box.
Allowing the cursor to hover over an e-mail destination box will display the e-mail address that the box is
associated with.