User manual
Table Of Contents
- SmartZone™ Network-Enabled M Series Rack PDU
- Equipment Overview
- Pre-Installation
- Installation
- Mounting
- Hardware
- Graphical User Interface
- Setup
- Input Sensors
- Power
Network-Enabled M Series Rack PDU User Manual
- 29 -
IP Configuration
System Name The name of the PDU
System Location The location of the PDU
Contact Name A person to contact regarding the PDU
Config Protocol Select the configuration protocol
IP Address The IP address of the PDU
Subnet Mask The Subnet Mask for the PDU IP Address
Gateway The Gateway for the PDU IP Address
IPv4 Address Configuration
There are several kinds of IPv4 address configurations that you can choose from. Static
IPv4 is the default configuration for firmware releases before firmware version 2.3.04.
DHCP is the default configuration for firmware releases after firmware releases 2.3.03.