User manual

Network-Enabled M Series Rack PDU User Manual
- 11 -
Installation
Before You Begin
Before installing your PDU, refer to the following lists to ensure that you have all the
items shipped with the unit as well as all other items required for proper installation.
Standard Accessories
Mounting Hardware:
l Vertical models:
Affixed button mounts
l Horizontal models:
Appropriate local mounting brackets and screws
Cables/Adapters:
l RJ45 patch cord cable
Hardwire PDU installation instructions
This product is intended to be hardwired by the customer must be installed by a qualified
electrician AND adhere to all national & local electrical codes.
1. To install, remove the (4) securing screws on the removable user panel.
2. Unscrew strain relief grommet cap (indicated below) and feed the power cable
through the grommet cap & the input gland.