Installation Manual

B20250 Rev.2 GMPSL-INV B20250 Rev.2 GMPSL-INV
Figure C
Figure D
For more information
Visit us at www.Panduit.com
Contact Customer Service by email: [e-mail]
Or by phone: [phone]
Figure C
1.) If needed, cut the
recessed section with a
knife to make clearance
for the valve stem.
Figure D
1.) For small valves using
PSL-V2A Only
2.) Drill a hole aligned
with hole created as in
Figure C
3.) Close the lockout
completely and install
lock
Cut Here
Cut Here
Drill Here
Figure C
1.) If needed, cut the
recessed section with a
knife to make clearance
for the valve stem.
Drill Here
Figure D
Figure C
Cut Here
Cut Here
Figure D
1.) For small valves using
PSL-V2A Only
2.) Drill a hole aligned
with hole created as in
Figure C
3.) Close the lockout
completely and install
lock
For more information
Visit us at www.Panduit.com
Contact Customer Service by email: [e-mail]
Or by phone: [phone]