Cut Sheet
www.panduit.com For service and technical support, call 1-800-PANDUIT.
21
Network Infrastructure
< Previous Page Table of Contents Next Page >
Zone Enclosures
Part Number Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
PZICEA PanZone
®
Active In-Ceiling Enclosure with hinged door gas-assist
air cylinders. Accepts up to 2 RU of active equipment and up to 6 RU
of passive equipment, includes mounting brackets and integrated
horizontal slack manager, AC power provisions, fan assembly, air dam,
and electrical junction box.
1 —
PZICE PanZone
®
Passive In-Ceiling Enclosure with hinged door gas-assist air
cylinders. Accepts up to 8 RU of passive equipment, includes mounting
brackets and integrated horizontal slack manager.
1 —
PZICEA PZICE
Grounding
Part Number Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Rack Grounding Kits
CNBK Bonding Cage Nut Kit. 1 —
GB2B0306TPI-1 Grounding busbar, BICSI 1/4" x 2" x 12" (6.4mm x 51mm x 305mm). 1 —
GB4B0624TPI-1 Grounding busbar, BICSI 1/4" x 4" x 20" (6.4mm x 102mm x 508mm). 1 —
GB4B0612TPI-1 Grounding busbar, BICSI 1/4" x 4" x 12" (6.4mm x 102mm x 305mm). 1 —
GB2B0304TPI-1 Grounding busbar, BICSI 1/4" x 2" x 10" (6.4mm x 51mm x 254mm). 1 —
GPQC10-1/0 Access oor grounding clamp, 7/8" (22.2mm) square,
1 – 1 1/8" (25.4 – 28.6mm) round.
1 —
RGCBNJ660P22 Jumper kits, Common Bonding Network (CBN), #6 AWG (16mm
2
)
jumper, 60" (1.52m) length.
1 —
RGCBNJ660PY Jumper kits, Common Bonding Network (CBN), #6 AWG (16mm
2
)
jumper, 60” (1.52m) length.
1 —
RGRKCBNJY Jumper kit, rack grounding retrot equipment. 1 —
RGRB19U Grounding busbar kits, 19" (483mm) length, 20 mounting holes, 5/8"
(15.9mm) hole spacing.
1 —
RGRB19Y Grounding busbar kits, 19" (483mm) length, 14 mounting holes, 1/2"
(12.7mm) hole spacing.
1 —
RGS134-1Y Grounding strip kits, one, 78.65" (2m) x 0.67" (17mm) x 0.05"
(1.27mm) strip.
1 —
Cabinet Grounding Kits
CGR630U Complete grounding kit for new installations on cabinets with 42 RUs,
threaded #12-24 or M6 rail fasteners and rail depth up to 30" (0.75m).
1 —
CGR630UB Complete grounding kit for new installations on cabinets with 42 RUs,
cage nut rail fasteners and rail depth up to 30" (0.75m).
1 —
RGESD2-1 Two-hole ESD port with 5/8" hole spacing; provided with an ESD
protection sticker, 0.16 oz. (5cc) of antioxidant, and two each
#12-24 x 1/2" and M6 x 12mm thread-forming screws.
1 20
RGESD2B-1 Two-hole ESD port with 5/8" hole spacing; provided with an ESD
protection sticker, 0.16 oz. (5cc) of antioxidant, two cage nut bonding
studs and two #12-24 bonding nuts.
1 20
RGESDWS Adjustable fabric ESD wrist strap with 6' coil cord, banana plug,
1 meg ohm resistor and 4mm snap.
1 —
RGREJ696Y Grounding jumper; #6 AWG (16mm²); 96" (2.44m) length. 1 10
RGRKCBNJEJY Rack grounding kit to ground the rack and one piece of equipment;
includes one RGRB19U busbar, one HTCT250-2-1 HTAP, and two
RGREJ696Y grounding jumpers.
1 10
RGTBSG-C Green thread-forming bonding screw, #12-24 x 1/2". 100 —
TRBSK Bonding stud kit for threaded #12-24 rail fasteners. 1 4
UGB2/0-414-12 Universal ground bar accepts #14 – #4 AWG wire in 12 wire ports
and up to a 2/0 AWG main equipment grounding conductor with a
compression or mechanical connector; 8.28" (210.3mm) length, 0.62"
(15.7mm) width, 0.48" (12.2mm) height.
1 10
UGB-B-SO Universal ground bar bonding stand-offs; includes two stand-offs
and hardware; 2.34" (59.3mm) length, 0.63" (15.9mm) width, 0.75"
(19.1mm) height.
1 10
UGB-IN-SO Universal ground bar isolation stand-offs; includes two stand-offs
and hardware; 1.57" (40mm) length, 0.59" (15.0mm) width, 0.98"
(25.0mm) height.
1 10
GB4B0624TPI-1
RGCBNJ660PY
CGK630**
RGESD2**
RGESD2B-1
RGREJ696Y
RGRKCBNJEJY
RGTBSG-C
TRBSK
UGB2/0-414-12
UGB-B-SO UGB-B-SO